Register Now

Borneoben · 10-30-2008, 06:04 AM

Hi Guys I am the unexpected proud owner of a Hyperion Duo
Read story here https://www.helifreak.com/showthread.php?t=101202

My question is this

I was fully expecting to have to buy new Adaptor boards for my Align stlye JST XH equiped Batteries . However i discovered that the adaptor board that came with the charger is abvle to accept a JST XH 6s balance lead??

Am i completely confused or is this Correct?

I have atached a picture to demonstrate what i mean

the picture shows a 6s - 3s adaptor plugged into the Hyperion adaptor board.

However.

the 2s 3s and 4s ports on the adaptor board are all the same size meaning i cannot plug in a 3cell pack?

I will order the correct JST XH adaptor but in the mean time am i OK to use the 6S port and charge two 3s packs???

Any guidence will be most appreciated.

Thanks

Ben

TheBum · 10-30-2008, 09:35 AM

The stock adapters that came with mine had all the sizes correct. Here's a bad photo of mine taken with my cell phone:

TheBum · 10-31-2008, 10:05 PM

I just remembered that the stock adapters were Hyperion style, which is not the same as the Align style. I had purchased two TP adapters and one Align adapter when I bought the charger. I'll have to pick up another Align adapter for the Zippy packs I just ordered.

Sorry about that.

Borneoben · 10-31-2008, 11:02 PM

Well Strangley Enough

I can safely use my JST XH 6s- 2x3s splitter just fine with the Hyperion boards that came with the charger as standard.

I did just this last night with no problems at all.

I am still ordering the correct adapters though as I don't want to tempt fate!!

Cheers
Ben

carljw · 11-29-2008, 07:20 PM

Hyperion EOS 0606i charger for E-Flite balancing plug, what is the correct one.
The adapter that came with the charger had 5 pins for 3 cell . I ordered a JST EH
# HP-LB-EH-b and it has the correct number of pins but my E-Flite balance tips
will not plug into the adapter. Anyone know the correct adapter that would work.

carljw · 11-29-2008, 07:25 PM

What adapter do i need to ballance E-Flite type ballance plugs with this charger.
I got a JST EH adapter it looks like the correct one but the E-Flite balance plug will not
connect with it.

sorry for the double post I did not think the first one took

10-30-2008, 06:04 AM	#1 (permalink)
Borneoben Registered Users My HF Map location Join Date: Feb 2005	Question Regarding Hyperion Adaptors Hi Guys I am the unexpected proud owner of a Hyperion Duo Read story here https://www.helifreak.com/showthread.php?t=101202 My question is this I was fully expecting to have to buy new Adaptor boards for my Align stlye JST XH equiped Batteries . However i discovered that the adaptor board that came with the charger is abvle to accept a JST XH 6s balance lead?? Am i completely confused or is this Correct? I have atached a picture to demonstrate what i mean the picture shows a 6s - 3s adaptor plugged into the Hyperion adaptor board. However. the 2s 3s and 4s ports on the adaptor board are all the same size meaning i cannot plug in a 3cell pack? I will order the correct JST XH adaptor but in the mean time am i OK to use the 6S port and charge two 3s packs??? Any guidence will be most appreciated. Thanks Ben Attached Thumbnails

10-30-2008, 09:35 AM	#2 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	The stock adapters that came with mine had all the sizes correct. Here's a bad photo of mine taken with my cell phone: __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people.

10-31-2008, 10:05 PM	#3 (permalink)
TheBum HF Support My HF Map location Join Date: Jul 2007	I just remembered that the stock adapters were Hyperion style, which is not the same as the Align style. I had purchased two TP adapters and one Align adapter when I bought the charger. I'll have to pick up another Align adapter for the Zippy packs I just ordered. Sorry about that. __________________ Alan (just call me "Bum"; no need to be so formal) HeliFreak Support Protos Max Evo 700 (Brain 2), Protos Max V2 770 (iKON 2), Synergy 516 (Brain 2), Oxy 2 (Falcon 12) Graupner MZ-32 Experience is something you gain only after you need it. I wouldn't mind social media so much if it didn't involve people.

11-29-2008, 07:20 PM	#5 (permalink)
carljw My HF Map location Join Date: Feb 2008	Hyperion Adapter # Hyperion EOS 0606i charger for E-Flite balancing plug, what is the correct one. The adapter that came with the charger had 5 pins for 3 cell . I ordered a JST EH # HP-LB-EH-b and it has the correct number of pins but my E-Flite balance tips will not plug into the adapter. Anyone know the correct adapter that would work.

11-29-2008, 07:25 PM	#6 (permalink)
carljw My HF Map location Join Date: Feb 2008	Hyperion Adapter # What adapter do i need to ballance E-Flite type ballance plugs with this charger. I got a JST EH adapter it looks like the correct one but the E-Flite balance plug will not connect with it. sorry for the double post I did not think the first one took

10-31-2008, 11:02 PM	#4 (permalink)
Borneoben Registered Users Thread Starter My HF Map location Join Date: Feb 2005	Well Strangley Enough I can safely use my JST XH 6s- 2x3s splitter just fine with the Hyperion boards that came with the charger as standard. I did just this last night with no problems at all. I am still ordering the correct adapters though as I don't want to tempt fate!! Cheers Ben

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in