Cant Find some Screws, Am I missing it?

[Dogdocphil]

Okay so I am on page 14 of the manual on top, I am putting the the tail case together with the tail case plate. I need three 2.5 by 5mm screws but they are no where to be found. I am used to picking out the part and have a little bag underneath it. None on the tail case and none on the tail case plate. Is it somewhere else?? or am I just missing it. BTW. The packing of this Heli is superb! So well thought out! Thanks for any advice!

[raptorheli2]

there is a spares bag in the kit-have a look in there and maybe get some. i can't mind exactly where mine were but i think they were in the tail case bag so yours might be MIA.

cheers

[Dogdocphil]

Found em!! They were in another parts bag. I got the tail together and it is TIGHT! I need to figure out how to make it move easier.

[raptorheli2]

i have 2 kits-had this same problem with both of them.

the only way i found to fix this was to

1. wet and dry the brass slider a little.
2. file the 4 holes holding the outer housing onto the boom so you can rotate that slightly to stop binding.

what you want to try and achieve is the pitch slider in the middle, if anyone else knows a better way i'd love to hear it.

cheers

[Dogdocphil]

Okay! so here is what fixed it for me. The four screws that hold the boom on between the inner and outer tail pieces, I tightened ONE bolt first. That was a no no. You have to slowly tighten all four slowly and when I was finished, perfect tail! It took some fiddling but it was worth it!