Need a little help streching my trex 600e

[Djhandz]

Hi helifreaks I need some help in streching my 600e I have most of the parts I need but can not find reference to the tail unit all the threads I have read seem to be tt tails.. what I need to kno is. I have tail belt unit h60253 will the h60123 pitch slider fit or will I have to get a whole new tt tail assembly

Thanks for reading

[treotraveler]

Originally Posted by Djhandz

Hi helifreaks I need some help in streching my 600e I have most of the parts I need but can not find reference to the tail unit all the threads I have read seem to be tt tails.. what I need to kno is. I have tail belt unit h60253 will the h60123 pitch slider fit or will I have to get a whole new tt tail assembly

Thanks for reading

You mean the H60132 belt tail?

http://www.alignrcusa.com/index.php?...roducts_id=455

The old pitch slider fits the old H60132 tail assembly.

You will need the upgrade pitch slider for the new upgraded H60253 belt tail.
http://www.alignrcusa.com/index.php?...oducts_id=2476

http://www.alignrcusa.com/index.php?...oducts_id=2164

The bearing holder on the H60253 belt tail upgrade has different sized bearings....

[Djhandz]

Thanks treotraveler yes I have the new upgraded belt unit h60253 please help me with the parts I need still unsure...or and sorry I meant the pitch slider shaft

[treotraveler]

Originally Posted by Djhandz

Thanks treotraveler yes I have the new upgraded belt unit h60253 please help me with the parts I need still unsure...or and sorry I meant the pitch slider shaft

Not sure what more you need. Get the H60077A, or H60077AT. The "T" arm on the H60077A or h60077AT will fit the new larger diameter slider shaft. The larger diameter slider shaft will fit the larger bearings in the bearing holder on the upgraded H60253 tail assembly. The H60077A or AT comes with the new slider shaft. I believe the H60253 comes with the new slider shaft.

Tap the third link in my post above....

[Djhandz]

Thanks treotraveler but I think I might of confused things by mentioning the pitch slider. What I meant was the torque tube rear drive gear set(h60123) can I put this part in to my tail belt unit(h60253) to make it in to a torque tube unit

[treotraveler]

Originally Posted by Djhandz

Thanks treotraveler but I think I might of confused things by mentioning the pitch slider. What I meant was the torque tube rear drive gear set(h60123) can I put this part in to my tail belt unit(h60253) to make it in to a torque tube unit

Well, now that we are on the same page.

No, because the left side plate on a belt tail assembly is different, and won't work for a torque tube gear and output shaft. Basically, a tail belt assembly uses a different side plate than a torque tube tail assembly. You need one of these if you want to go torque tube.....

http://www.alignrcusa.com/index.php?...oducts_id=2475

[Djhandz]

Thanks so much for your help traveler

[Djhandz]

Ok thinking of going with a belt as it would be cheaper anybody know where I can get a longer belt to fit the 700 boom ??