Register Now

wayneparrish · 11-09-2008, 06:28 PM

I would appreciate feedback on your opinions of the best blade for the Raptor 90 heli. I have run the 710 TT blades and currently have a set of SAB 710 3-D blades on it. I am a roll,loop,etc. type with a little fairly smple 3D thrown in to keep my heart rate up.I love auto's so that probably means sticking to the 710mm blades. Thanks ahead for the advice. Wayne

Aussie_G · 11-09-2008, 07:17 PM

Take a look at the SWE blades over at helidirect...

They fly real nice

Badger50 · 11-09-2008, 07:33 PM

Hey Wayne: Glad you got your clutch worked out :-) I have flown the Radix 690's, Rotor Tech 700 & 710's and the Maverick G5 700's I think they are all very good blades. The best bang for the buck I would definitely recommend the G5's and unless your very experienced, would be hard pressed to tell the difference between the Radix blades. My personal favorite are the Rotor Tech 700's, they are top quality, and a good mix for 3D and autos. When you get to "Stick Banger" status, then go with the 690's. But hey, then again, these are just my opinions. And you know what they say about opinions :-) Good luck to you.

wayneparrish · 11-09-2008, 07:44 PM

Thanks guys for the info.,I'll check them out. Wayne

11-09-2008, 06:28 PM	#1 (permalink)
wayneparrish Registered Users My HF Map location Join Date: Jun 2008	Raptor 90 710mm blade suggestions I would appreciate feedback on your opinions of the best blade for the Raptor 90 heli. I have run the 710 TT blades and currently have a set of SAB 710 3-D blades on it. I am a roll,loop,etc. type with a little fairly smple 3D thrown in to keep my heart rate up.I love auto's so that probably means sticking to the 710mm blades. Thanks ahead for the advice. Wayne

11-09-2008, 07:17 PM	#2 (permalink)
Aussie_G Registered Users Join Date: Mar 2008 Location: Greenville, SC	Take a look at the SWE blades over at helidirect... They fly real nice __________________ Outrage R/C - Enter The Rage! There are only two ways to fly - my way and the right way

11-09-2008, 07:33 PM	#3 (permalink)
Badger50 Registered Users My HF Map location Join Date: Oct 2007	Hey Wayne: Glad you got your clutch worked out :-) I have flown the Radix 690's, Rotor Tech 700 & 710's and the Maverick G5 700's I think they are all very good blades. The best bang for the buck I would definitely recommend the G5's and unless your very experienced, would be hard pressed to tell the difference between the Radix blades. My personal favorite are the Rotor Tech 700's, they are top quality, and a good mix for 3D and autos. When you get to "Stick Banger" status, then go with the 690's. But hey, then again, these are just my opinions. And you know what they say about opinions :-) Good luck to you. __________________ Mike: Rap-90 3D x 2, Rap-50 x 2, Fury 55, Rex-450, Hirobo Squark. *"Depression is nothing more than anger, without enthusiasm"*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-09-2008, 07:44 PM	#4 (permalink)
wayneparrish Registered Users Thread Starter My HF Map location Join Date: Jun 2008	Thanks guys for the info.,I'll check them out. Wayne

Register Now

Log-in