HS-5065MG servo ball distance for FBL

[AcidDrink]

Hi!

I am just wondering what cyclic servo ball distance would you guys recommend for FBL system. I've read the forum and some people recommend 13.5, some default 15 mm.
(my FBL system is CGY750, but I'd like to hear from other system owners as well).

I understand that 13.5 will give me more resolution, but servos I got have no arms which would allow 13.5 mm spacing. It's either 15 mm or 12.5 or less.

Thanks in advance!

[ziper_it]

I have it on the double sided arm, side marked 2, 2nd hole from outside.
This is a 5065 with BX.

[mmc205]

i used 13.5mm, and it seemed to provide near perfect resolution when i did my vbar setup, i was at 100 points on both the collective and cyclic setup, with 80-110 being the recommended range that the control loop would perform the best.

[AcidDrink]

Thanks for your replies, I've put mine on 13.5(approx), I'll report how it flies when build is done. I am probably one of the first persons who is going to use CGY750 on mini protos.

[benwhite22]

Originally Posted by AcidDrink

Thanks for your replies, I've put mine on 13.5(approx), I'll report how it flies when build is done. I am probably one of the first persons who is going to use CGY750 on mini protos.

AcidDrink, what are your swash AFR's with the 13.5mm balll distance and the CGY750?

[AcidDrink]

Originally Posted by benwhite22

AcidDrink, what are your swash AFR's with the 13.5mm balll distance and the CGY750?

I don't know, I am yet to finish setting this up. I'll let you know when I am done (2-3 days)

[AcidDrink]

Originally Posted by benwhite22

AcidDrink, what are your swash AFR's with the 13.5mm balll distance and the CGY750?

55% pitch, 75% elev, 65% aileron. -12/12, 8 for aileron/elev.