START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Align 3G FBL System Align 3G FBL Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
11-12-2012, 06:35 AM | #1 (permalink) |
Registered Users
Join Date: Nov 2012
|
Align 3GX / Spektrum DX8 Gov Question
Hi guys
I'm trying to set up the governor on my T-Rex 700N w/3GX and Spektrum DX8. Problem: The gov led on the 3GX is red (gov OFF), no matter what I try. Here is my setup: - the gov sensor is plugged in the corresponding port on 3GX - gov led is red and switches off/on when passing a magnet - remote governor mode is on channel Aux2 - normal mode 0%, Idle Up 1 70%, Idle Up 2 80%. What am I missing? Thanks for your help! Happy flying, Chris |
Sponsored Links | |||
Advertisement |
|
11-12-2012, 08:38 AM | #2 (permalink) |
Registered Users
|
Using a sat receiver I assume?
AUX2= gyro gain AUX1 (gear) = gov
__________________
TRex 250 DFC | TRex 250 DFC (Scale) 2 @ TRex 450 DFC | TRex 450 Pro 3G (Scale) TRex 550 DFC DX8 + Telemetery on all |
11-12-2012, 10:42 AM | #3 (permalink) |
Registered Users
Join Date: Nov 2009
|
Gov is on gear channel. Use mixing. Link up to view the head speed the values will provide
the rpms with each position
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
11-12-2012, 01:11 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
Problem solved
Hi guys
Thanks for your help. I had a R8000 (+attached SAT receiver) connected to the 3GX in order to make use of DSMX (vs. DSM2) technology. This config wouldn't allow me to control the gov function, no matter what channel used. I now switched to 2 SAT receivers directly connected to the 3GX, which makes for a very clean/uncluttered setup (though DSM2 only). With GYRO GAIN on Ch 7 and GOV on CH 5 all works fine now. Thanks for the inputs guys! Happy landings! Chris |
11-12-2012, 04:57 PM | #5 (permalink) |
Registered Users
Join Date: Nov 2009
|
Here's another set or my vbar, one mixing for both FM 1&2 abd then another for just 2 and that one adds to the first for just FM2. Losts of ways to configure
__________________
Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX |
Thread Tools | |
Display Modes | |
|
|