Register Now

yerome1 · 10-24-2013, 11:11 AM

Hi everyone, i hope that someone can help me with my problem with walkera genius CP.
Iam just learnig how to fly 6ch heli so i set my devo7 accord this setup:
https://www.helifreak.com/showpost.p...8&postcount=10

my problem is that heli make terible noises.

Watch the video please and try to help me out with this:

yerome1 · 10-24-2013, 12:41 PM

Like i said iam new to heli

i just figure out what is the problem, its look like the large wheel on botom attached to motor was pop out a little... nvm

if someone can please delete this thread. thx

domcars0 · 10-24-2013, 02:33 PM

Blade tracking tape torn? Remove it.

JWeber · 10-24-2013, 02:42 PM

Or bad gear mesh between the motor and main gear.

yerome1 · 10-25-2013, 06:15 AM

All works fine now except a little drift to left and heli keep slowly turning left.
Its look like i will do more seting and fixing than flying

or i switch from 6axis to 3axis

HeHenri · 10-28-2013, 03:04 PM

Is your Genius V1?
V2 would be much better for learning to fly...

10-24-2013, 02:42 PM	#4 (permalink)
JWeber Registered Users Join Date: Mar 2012 Location: Wauwatosa, WI	Or bad gear mesh between the motor and main gear. __________________ Specter v2, Tron Dnamic, Nimbus 550, P380, Edge-TX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-24-2013, 12:41 PM	#2 (permalink)
yerome1 Registered Users Thread Starter Join Date: Oct 2013	Like i said iam new to heli i just figure out what is the problem, its look like the large wheel on botom attached to motor was pop out a little... nvm if someone can please delete this thread. thx

10-24-2013, 02:33 PM	#3 (permalink)
domcars0 Registered Users Join Date: Jan 2011	Blade tracking tape torn? Remove it.

10-25-2013, 06:15 AM	#5 (permalink)
yerome1 Registered Users Thread Starter Join Date: Oct 2013	All works fine now except a little drift to left and heli keep slowly turning left. Its look like i will do more seting and fixing than flying or i switch from 6axis to 3axis

10-28-2013, 03:04 PM	#6 (permalink)
HeHenri Registered Users Join Date: Nov 2011	Is your Genius V1? V2 would be much better for learning to fly...

Register Now

Log-in