Register Now

Picofly · 08-18-2011, 12:41 AM

Quote:

Originally Posted by ChadL

How do you like the nanotech batteries?

They are ok but discharge rate could be higher. 2650 mAh Nanotech weighs 215g and gives me 5 min of flying (mediocre 3D). I will try a 45C Voltz battery next.

Thunder Fighter · 08-22-2011, 05:10 AM

My stretch.

4s 2010kv MSH motor (OEM Scorpion)
YGE 60A ESC (bundled with the kit)
SK720 FBL controller
DS410's on cyclic
MKS8910 on the tail
4s 2200 30C Turnigy packs
SAB 350mm blades

//Dennis.

AusAnt · 09-03-2011, 10:23 PM

My stretch,

Stock motor
Stock ESC
3s 2200 - planning to change to 6s and the 1300Kv motor when these die
Mini VBar 5.2 Pro
Cyclic - MKS DS95's
Tail - Align DS 520
SAB 350's

Flies awesome!

kjoer · 11-19-2011, 05:12 PM

Here the list of my first proper heli (inspired by cruddbucket's video). I know this isn't exactly an entry level heli. Had fun building it though, setting it up right now

. Thanks to internet; cruddbucket and Smacktalk RC. Learning tons.

Mini Protos Carbon kit Naked MSH41502
MSH41106 Mini Protos stretch Kit with blades
MSH51305 Gorilla Tail Blades Yellow
MSH41103 Flybarless hub low
MSH41112 CNC Alu pulley set
MSH41104 Alu CNC tail pulley
MSH41014 Pinion 14T
MSH41113 MSH Scorpion Motor 1300Kv (6S)
MSH41093 ESC MSH by YGE 60 Amp
3x MKS DS95 Micro Coreless Digital Cyclic Servo
MKS DS95i Micro Coreless Digital Tail Servo
MIK4357 Mini V-Bar Blueline 5.0 Express (upgraded to 5.2 pro)
2x NRG355C-13006 OUTRAGE 5C NRG35 6S1P 22.2V 1300mAH 35C XTREME
Futaba 8FG Super 14-Channel SBus Radio Tx
Futaba R6208SB 8-Channel 2.4GHz FASST Hi-Voltage Rx
Futaba S-Bus Rx Gyro Link Lead P-SBC-LEAD

kjoer · 12-10-2011, 04:36 PM

Quote:

Originally Posted by kjoer

Futaba R6208SB 8-Channel 2.4GHz FASST Hi-Voltage Rx

Swapped that clunky 8 channel S.Bus receiver for the 3 channel S.Bus receiver I should have chosen in the first place:

Futaba R6203SB 2.4GHz FASST Micro S.Bus HV Receiver

Millo · 12-12-2011, 06:37 AM

My stretch FBL setup:
Stretch MiniP with lowered FBL hub
BeastX Microbeast v3 + Satellite with adapter
MSH41078 Brushless Motor 2010kv (4S) + 15T pinion
MSH YGE 60A (gov. store)
Cyclic - Savox SH-0257MG
Tail - Savox SH-1257MG
Radix 350mm FBL + stock tail blades
Zippy Flightmax 4S 2200mAh
DX8

Matt Nasca · 12-23-2011, 04:40 PM

Stretch FBL setup:
Stretch MiniP with lowered FBL hub & Flybar swash balls
Mini Vbar 5.2 Pro with Satellite
MSH 40118 Brushless Motor 1300kv (6S) + 16T pinion
MSH YGE 60A (gov. store) 80% TH curve
P-Gain .9
I-Gain .03
Cyclic - MKS DS95
Tail - MKS DS95i
Edge 325mm FBL + MSH yellow tail blades
Voltz 6S 1300mAh 35C

lazor 22 · 01-11-2012, 03:23 PM

Stretched with lowered hub
BeastX v3
Scorpion HKII 2221-12 (16T Pinion)
Castle ICE 50
JR 285mg
Futaba S9257
Radix 350's & KBDD 61mm
3s 2200 packs

IBremer · 01-14-2012, 03:45 PM

325mm Stock SAB, testing Edge tomorrow
61mm KBDD
Lowered Head will be here next week
Stock Motor and ESC. YGE Progcard will also be here next week for Gov Store etc.
18th pinion, 90% flat
BeastX v3
DS95 Cyclic
8910+ Tail
3s 40C 2200

Big step up from 450 Sport, still have to get used to how tight this baby flies!

SMJT · 03-20-2012, 01:32 PM

Non stretched
Low profile Hub
Spektrum AR7200BX
MKS DS92 on cyclic
MKS DS8910A+ on tail (soon to be DS95i)
Edge 325 flybarless main blades
Edge 60 tail blades/MSH mini tail blades
MSH/YGE 60 ESC
16T pinion 70% - 80% flat throttle curve
Hyperion G3 2600mah 3s 35C

th0rg0d · 04-01-2012, 02:52 PM

Non stretched
Spektrum AR7200BX
Hitec HS65HB on cyclic
JR DS3500G
SAB 325 mains
MSH Yellow tail blades
YGE 60A
16t pinion 62-70-80%
GensAce 3s 2200mAh 25C

Low hub ready to be installed after next crash.

wbefield · 04-22-2012, 11:36 AM

Here's mine

Stretched tail
KBDD tail blades
350mm Radix Blades
Low FBL Head
YGE 60A esc Governed
MSH 1300kv motor
Blue Lipo 1300mah 6s 30c
CNC servo Blocks
Alum pulley guides
CNC tail pulley

Upgraded servos and FBL unit:
AR7200BX
MKS DS95/DS95i

soniczen · 06-08-2012, 10:51 AM

My first heli build. Completed about 2 months ago. I usually fly at Rancho San Antonio in San Jose, CA.

Mini Protos Kit (3s Scorpion motor, YGE)
Spektrum AR7200BX
Hitec HS65MG cyclic
Futaba s9257 tail
325mm PRO 3D Fiberglass main blades
15t pinion
ProgCard, gov store
Yellow Fusuno canopy for better visibility
Turnigy 2200mAh 30-40C
Thunder Power 2250 mAh 45-90C
Hyperion G3 2600mAh 35-65C
ProTek Prodigy 610 Duo charger
Feather Power (feathermerchantrc) 42A 12v PSU
DX7s
Throttle curve = 65% for ~2500 HS

infra77 · 07-01-2012, 08:57 PM

Here's my setup...

std kit with 2580kv n yge 60a esc(gov store)
msh tail blades(yellow)
325 align blades
mks ds535 cyclic
fut 9257 tail with beastx
winmax lipo 2200mah 3s 30c/40c
CNC 3rd bearing
CNC tail pulley
Low fbl hub
15t pinion 68-75% flat curve
8fg

soon to upgrade:
cnc servo blocks

Spork01 · 07-01-2012, 11:49 PM

Mini P not stretched

HS5065mg cyclic
Futaba 9257 tail
MSH scorpion 2580kv motor with 16t pinion
Ice lite 50 no gov 100% flat throttle
BeastX fbl gyro
Align 325 CF mains

pilot4fn · 08-06-2012, 02:41 PM

Here's my MiniProtos setup:
- MSH MiniProtos Carbon kit
- MSH41093 ESC MSH by YGE 60 A
- MSH41078 Motor 2010Kv (4S)
- MSH41103 Flybarless hub low
- MSH41112 Alu CNC pulley set Mini
- 3x TGY-306G MG Digital Alloy Cased Servo 3kg / .06sec / 21g
- Align 3g / SAB 325 CF blades
- Mini V-BAR

pommesschranke · 08-12-2012, 03:52 AM

this is for dr dremel :-)

mini Protos stretched but with 325mm Blades
Motor: stock 2580kV
Pinion: 14T
ESC: Align 60A
Beast-X V3.0
Cyclic : Align DS 410
Tail: Align DS520

Headspeed:
sports flying: 2200
soft 3D:
2550 with old Lipo
2700 with new Lipo

videos:
https://www.helifreak.com/showpost.p...&postcount=238

dr dremel · 09-09-2012, 05:46 AM

New MP owner here, bought it used and after rebuild this is my setup:

MP stretch, 345mm blades
Motor: Turnigy 2100kV
Pinion: 15T
stock esc
Microbeast v3
Cyclic: Savöx 0261MG
Tail: Savöx 1357

As this is a new heli size for me I mostly fly on 3S to get used to it. Also have the stock motor which is waiting for my skills to catch up. Tried 4S a few times, OMG

ahunter852 · 10-15-2012, 07:38 PM

Hi guys,

was just wandering if the beast x users could share there pot settings.
im kind of struggling a little bit on getting it locked in. currently i am on
pot 1: -+2 from default
pot2: defaults
pot3: - 2 from centre.

any info would be greatly appreciated!
thanks
Alex

Thunder Fighter · 10-15-2012, 09:46 PM

Quote:

Originally Posted by ahunter852

pot 1: -+2 from default
pot2: defaults
pot3: - 2 from centre.

I have a Brain on now but I used to have:

Pot1: +2 (almost 10 O'clock)
Pot2: default
Pot3: default

I did have some pitch pump and increased tail precomp but I can't remember the colours sorry.

//Dennis.

08-22-2011, 05:10 AM	#42 (permalink)
Thunder Fighter Registered Users Join Date: Jul 2007 Location: Melb, Oz	My stretch. 4s 2010kv MSH motor (OEM Scorpion) YGE 60A ESC (bundled with the kit) SK720 FBL controller DS410's on cyclic MKS8910 on the tail 4s 2200 30C Turnigy packs SAB 350mm blades //Dennis. __________________ soXos: Strike 8.1 - Strike 7.1 Light - Strike 6.1 : Goosky: RS7 - RS4 - S2 - S1 soXos DB7 nightflyer : Jeti DS-16 & DS-12 I am www.soxosaustralia.com.au \| soXos helis \| 1st-RC Products \| EGODRIFT motors \| Goosky helis \| Spinblades

09-03-2011, 10:23 PM	#43 (permalink)
AusAnt Registered Users My HF Map location Join Date: May 2007	My stretch, Stock motor Stock ESC 3s 2200 - planning to change to 6s and the 1300Kv motor when these die Mini VBar 5.2 Pro Cyclic - MKS DS95's Tail - Align DS 520 SAB 350's Flies awesome! Attached Thumbnails __________________ Logo Xxtreme Mini Protos stretch - Mini VBar

11-19-2011, 05:12 PM	#44 (permalink)
kjoer Registered Users Join Date: Sep 2011 Location: The Netherlands	Here the list of my first proper heli (inspired by cruddbucket's video). I know this isn't exactly an entry level heli. Had fun building it though, setting it up right now . Thanks to internet; cruddbucket and Smacktalk RC. Learning tons. Mini Protos Carbon kit Naked MSH41502 MSH41106 Mini Protos stretch Kit with blades MSH51305 Gorilla Tail Blades Yellow MSH41103 Flybarless hub low MSH41112 CNC Alu pulley set MSH41104 Alu CNC tail pulley MSH41014 Pinion 14T MSH41113 MSH Scorpion Motor 1300Kv (6S) MSH41093 ESC MSH by YGE 60 Amp 3x MKS DS95 Micro Coreless Digital Cyclic Servo MKS DS95i Micro Coreless Digital Tail Servo MIK4357 Mini V-Bar Blueline 5.0 Express (upgraded to 5.2 pro) 2x NRG355C-13006 OUTRAGE 5C NRG35 6S1P 22.2V 1300mAH 35C XTREME Futaba 8FG Super 14-Channel SBus Radio Tx Futaba R6208SB 8-Channel 2.4GHz FASST Hi-Voltage Rx Futaba S-Bus Rx Gyro Link Lead P-SBC-LEAD __________________ RAW 420 / RAW 580 / Kraken 580 Nitro / Goblin 700 / 2x RAW 700 / Kraken 700 S VBC-t & Neo Pro / Scorpion motors & ESCs / MKS HBL575 SL & HBL980 / Supra X D4, D6 & S6 / OptiPower / Revolectrix 2x Bump & 5x PL8v2 https://www.youtube.com/kjoer

12-12-2011, 06:37 AM	#46 (permalink)
Millo Registered Users Join Date: Sep 2006	My stretch FBL setup: Stretch MiniP with lowered FBL hub BeastX Microbeast v3 + Satellite with adapter MSH41078 Brushless Motor 2010kv (4S) + 15T pinion MSH YGE 60A (gov. store) Cyclic - Savox SH-0257MG Tail - Savox SH-1257MG Radix 350mm FBL + stock tail blades Zippy Flightmax 4S 2200mAh DX8 __________________ Prôtos 500, YGE-80, iKON+sats, DX8+Tm1100 Telemetry Mini Prôtos Stretch 4S, YGE-60A, MSH/Scorpion 2010kV, iKON+sat, DX8+Tm1100 Telemetry

12-23-2011, 04:40 PM	#47 (permalink)
Matt Nasca Registered Users My HF Map location Join Date: Jan 2010	Stretch FBL setup: Stretch MiniP with lowered FBL hub & Flybar swash balls Mini Vbar 5.2 Pro with Satellite MSH 40118 Brushless Motor 1300kv (6S) + 16T pinion MSH YGE 60A (gov. store) 80% TH curve P-Gain .9 I-Gain .03 Cyclic - MKS DS95 Tail - MKS DS95i Edge 325mm FBL + MSH yellow tail blades Voltz 6S 1300mAh 35C __________________ GAUI NX7 - GAUI X7 - GAUI X5 - GAUI NX4 - GAUI GX4 - GAUI X4 II - GAUI X3 - GAUI X2 - All on VBar 5.3 Pro Team GAUI USA / Empire Hobby / Scorpion Power Systems / Optipower Batteries / Cyclone Blades / Savox / YS Engines / VP PowerMaster / JR

01-11-2012, 03:23 PM	#48 (permalink)
lazor 22 Registered Users My HF Map location Join Date: Apr 2010	Stretched with lowered hub BeastX v3 Scorpion HKII 2221-12 (16T Pinion) Castle ICE 50 JR 285mg Futaba S9257 Radix 350's & KBDD 61mm 3s 2200 packs __________________ Lincoln #HIGHONHELIS ):> Pull Hard RCHO Flying Field, Knightdale NC

01-14-2012, 03:45 PM	#49 (permalink)
IBremer Registered Users Join Date: Sep 2010	325mm Stock SAB, testing Edge tomorrow 61mm KBDD Lowered Head will be here next week Stock Motor and ESC. YGE Progcard will also be here next week for Gov Store etc. 18th pinion, 90% flat BeastX v3 DS95 Cyclic 8910+ Tail 3s 40C 2200 Big step up from 450 Sport, still have to get used to how tight this baby flies!

03-20-2012, 01:32 PM	#50 (permalink)
SMJT Registered Users Join Date: Jun 2011	Non stretched Low profile Hub Spektrum AR7200BX MKS DS92 on cyclic MKS DS8910A+ on tail (soon to be DS95i) Edge 325 flybarless main blades Edge 60 tail blades/MSH mini tail blades MSH/YGE 60 ESC 16T pinion 70% - 80% flat throttle curve Hyperion G3 2600mah 3s 35C Attached Thumbnails __________________ SYNERGY 516 Mikado LOGO 550 Mikado LOGO 700

04-01-2012, 02:52 PM	#51 (permalink)
th0rg0d Registered Users My HF Map location Join Date: Oct 2006	Non stretched Spektrum AR7200BX Hitec HS65HB on cyclic JR DS3500G SAB 325 mains MSH Yellow tail blades YGE 60A 16t pinion 62-70-80% GensAce 3s 2200mAh 25C Low hub ready to be installed after next crash. Attached Thumbnails __________________ Goblin 500 Sport HW 100v3 Brain2 KST Rail 516 Prôtos stretch AR7200BX Savöx 1250/1290MG Switch 473 180CFX DX18 RCHN #0650 AMA# 448427

04-22-2012, 11:36 AM	#52 (permalink)
wbefield Registered Users My HF Map location Join Date: Jun 2011	Here's mine Stretched tail KBDD tail blades 350mm Radix Blades Low FBL Head YGE 60A esc Governed MSH 1300kv motor Blue Lipo 1300mah 6s 30c CNC servo Blocks Alum pulley guides CNC tail pulley Upgraded servos and FBL unit: AR7200BX MKS DS95/DS95i __________________ William Synergy N5C, 130x, Mini Protos 6s Last edited by wbefield; 05-01-2012 at 09:27 PM.. Reason: Setup Change

06-08-2012, 10:51 AM	#53 (permalink)
soniczen Registered Users My HF Map location Join Date: Jan 2012	My first heli build. Completed about 2 months ago. I usually fly at Rancho San Antonio in San Jose, CA. Mini Protos Kit (3s Scorpion motor, YGE) Spektrum AR7200BX Hitec HS65MG cyclic Futaba s9257 tail 325mm PRO 3D Fiberglass main blades 15t pinion ProgCard, gov store Yellow Fusuno canopy for better visibility Turnigy 2200mAh 30-40C Thunder Power 2250 mAh 45-90C Hyperion G3 2600mAh 35-65C ProTek Prodigy 610 Duo charger Feather Power (feathermerchantrc) 42A 12v PSU DX7s Throttle curve = 65% for ~2500 HS

07-01-2012, 08:57 PM	#54 (permalink)
infra77 Registered Users Join Date: Jul 2012	Here's my setup... std kit with 2580kv n yge 60a esc(gov store) msh tail blades(yellow) 325 align blades mks ds535 cyclic fut 9257 tail with beastx winmax lipo 2200mah 3s 30c/40c CNC 3rd bearing CNC tail pulley Low fbl hub 15t pinion 68-75% flat curve 8fg soon to upgrade: cnc servo blocks

07-01-2012, 11:49 PM	#55 (permalink)
Spork01 Fear the Spork!! Join Date: Mar 2008	Mini P not stretched HS5065mg cyclic Futaba 9257 tail MSH scorpion 2580kv motor with 16t pinion Ice lite 50 no gov 100% flat throttle BeastX fbl gyro Align 325 CF mains __________________ Trex 450L, OMP M2, Futaba 14SG

08-12-2012, 03:52 AM	#57 (permalink)
pommesschranke Registered Users My HF Map location Join Date: Oct 2009	my mini Protos this is for dr dremel :-) mini Protos stretched but with 325mm Blades Motor: stock 2580kV Pinion: 14T ESC: Align 60A Beast-X V3.0 Cyclic : Align DS 410 Tail: Align DS520 Headspeed: sports flying: 2200 soft 3D: 2550 with old Lipo 2700 with new Lipo videos: https://www.helifreak.com/showpost.p...&postcount=238 __________________ mcpx, T-Rex250, Blade400, HK450GT, mini Protos stretch. my sim: http://www.heli-x.net/

09-09-2012, 05:46 AM	#58 (permalink)
dr dremel Registered Users Join Date: Aug 2011	New MP owner here, bought it used and after rebuild this is my setup: MP stretch, 345mm blades Motor: Turnigy 2100kV Pinion: 15T stock esc Microbeast v3 Cyclic: Savöx 0261MG Tail: Savöx 1357 As this is a new heli size for me I mostly fly on 3S to get used to it. Also have the stock motor which is waiting for my skills to catch up. Tried 4S a few times, OMG

10-15-2012, 07:38 PM	#59 (permalink)
ahunter852 Registered Users Join Date: Jun 2012	Hi guys, was just wandering if the beast x users could share there pot settings. im kind of struggling a little bit on getting it locked in. currently i am on pot 1: -+2 from default pot2: defaults pot3: - 2 from centre. any info would be greatly appreciated! thanks Alex

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in