4G3 with 2801 Pro need help.

[4g3freak]

Ok my 1st problem is I am still a bit of a noob. But i think something is wrong with heli...


When I hit 75% throt the main motor slows down a bit when i hit 100% it wil cut out, and I will lose all stick movement untill I reconnect...

Tx 2801 with RX 2605 - two out of fifteen time it will connect properly...

At most throt % tail will speed up and slow doen never running at one speed...

____

Random question at 50% throt where should blade pitch be... And what do I line up Fly bar paddels to... Level with heli or should they be pitched????


Please help, Trying to learn I would love you advice.

[Dusty1000]

Hi, at 50% throttle, blade pitch should be 0.

Flybar paddles should be flat.

Do you have a brushless main motor? What lipos do you have?

Dusty

[4g3freak]

600 20c from wowhobbies and i also have a stock 400 both act the same.

motor is from wow hobies Turbo Ace 81220-4G3
upgraded with heli tail too, came with esc

[4g3freak]

now i cant seem to even get off the ground i think something on it is fried like the RX or a esc? not sure whats going on.. many problems might re do my tx from scratch and follow some charts up on here. maybe something is up with my settings.

[4g3freak]

does it matter what blade goes on what side? or is it the same thing?

[Silverexpress01]

my prior info presented was deemed inaccurate - I removed it.

[babber411]

I had this, fixed it with a new ESC. Might not fix it for you, but any loading on my motor and it cut out.

Hope this helps, Phill