Register Now

integy2 · 02-16-2011, 04:34 PM

MicrobeastX

2221-1650kv
Ice 50
1200mAh 6S
Edge
3500G
After 4.20mins
All temp. good 118F - motor
86F - ESC
91F - Batts.
http://rc.runryder.com/helicopter/rr...s=-Welcome.txt

bigballajeff · 03-01-2011, 11:41 PM

converted my flybarred mini to fbl and it was my first fbl heli and i must say, i thought this was a great heli flybarred but i actually like it more now its fbl....heres my setup

Stock motor and esc
align 410m's on cyclic
3500g on the tail
sab blades
minivbar
Voltz 3s 2200mah 45c batteries...

killermolly · 03-08-2011, 09:43 AM

I'm going to use HS-5065mg servos and a microbeast.
My ? is do I put the ball on the servo horn at 15mm from the horn screw?

michael88997 · 03-08-2011, 10:12 AM

I'm using the 410's and I have them at 15mm and it works great, I get the blue light at 6deg

killermolly · 03-15-2011, 01:33 PM

Quote:

Originally Posted by michael88997

I'm using the 410's and I have them at 15mm and it works great, I get the blue light at 6deg

Thanks

visionplay · 04-05-2011, 07:39 PM

Building one now with the following setup

-Stock Motor / ESC combo
-MKS 95's on Cyclic
-9257 on Tail
-Mini Vbar 5.1 pro
-Thunder power 3s 65C 2250mah
-17t Pinion

Hoping to run a headspeed of around 3300-3400rpm.

Cannot wait till its maiden, should be good.

brtmac · 04-10-2011, 11:25 PM

Turnigy H2218 2100Kv16T
CC Ice 50 Lite
Spektrum H3000 cyclic
Futaba 9650 tail
Minibeast w/Spektrum Sat
Turnigy Nanotech 2200 3s/4s
Running 2400/3s 3000/4s

AcidDrink · 05-18-2011, 07:00 PM

After long moaning over decision and deciding that a 600 needs to wait a couple of months, Mini Protos is on its way.

Setup:

Mini Protos Carbon kit YGE+Scorpion+SAB MSH41501
Hitec HS5065MG Digital Servo HS5065MG x3
Futaba BLS257 Brushless Digital Mini Servo P-SBL257
Voltz 2200mAh 3S 11.1V 35C Lipo Pack VT220035C3S

Waiting for Futaba CGY750 to get back in stock...

p.s. can you run BLS257 @ 5.5V?

invertsick · 06-10-2011, 12:26 AM

Quote:

Originally Posted by integy2

MicrobeastX

2221-1650kv
Ice 50
1200mAh 6S
Edge
3500G
After 4.20mins
All temp. good 118F - motor
86F - ESC
91F - Batts.
http://rc.runryder.com/helicopter/rr...s=-Welcome.txt

now MINI V

Ride · 06-27-2011, 03:49 AM

Just converted my mini to FBL.

stock motor
CC Ice lite 50 esc
stretch kit
Radix 350mm FBL blades
hs-65mg
s9257
Microbeast

Im loving this thing right now! With the radix 350 fbl blades I even had a perfectly successful auto despite people saying that the single belt system is not suited for autos.

vs0587 · 07-18-2011, 04:37 AM

My Mini Protos Flybarless setup is as follows:

Align 3GX
Spektrum AR600
Hitec HS-5065 Digital Metal Gear Servos (cyclic)
Align DS520 (tail)
Motor, ESC and blades (kit suppled stock)
Flybarless hub low MSH41103

I'll try this configuration next week end![/QUOTE]

baui2000 · 07-18-2011, 05:08 AM

Occurs to me I didn't share, shame on me

Here goes:

Stretch MiniP with lowered FBL hub
BeastX Microbeast v2
Scorpion 2221-12 / 14T pinion
MSH YGE 60A
Cyclic: Savox SH-0257MG
Tail: Savox SH-0253
Spektrum AR8000 + 1 Satellite
Radix 350mm FBL + stock tail blades
Zippy Flightmax 4S 2200mAh 40C

I want to change to Microbeast v3 with a DSMX satellite and buy a couple other FBL blades to try out this summer.

ChadL · 07-18-2011, 11:33 AM

Futaba CGY750 FBL controller (I run this on my 550e as well)
Futaba 6203SB receiver (nice and small)
Updated low profile FBL Head
Hitec 5065s on the cyclic
Futaba BLS 257 on the tail
Stock motor and pinion (16T)
CC Ice 50A ESC
EDGE FBL blades

AcidDrink · 07-18-2011, 05:24 PM

Quote:

Originally Posted by ChadL

Futaba CGY750 FBL controller (I run this on my 550e as well)
Futaba 6203SB receiver (nice and small)
Updated low profile FBL Head
Hitec 5065s on the cyclic
Futaba BLS 257 on the tail
Stock motor and pinion (16T)
CC Ice 50A ESC
EDGE FBL blades

Very similar setup to mine (I run yge esc, otherwise everything the same).
Just to give you a tip, I've had servo balls at 13.5mm and it gave me too high AFRs (elev was in 70s). 15 mm works much better, aile/elev are in 50-60, pitch is 47.
Flies like on rails.

Millo · 07-19-2011, 12:48 AM

My Mini Protos Flybarless setup :

BeastX Microbeast v2 + Satellite with adapter
Motor and blades - stock
ESC - Kontronik JAZZ 40 (waiting for YGE)
Cyclic - Savox SH-0257MG
Tail - Savox SH-1257MG
Voltz 3S 2200mAh 45C lipos

exit44rc · 07-19-2011, 08:02 AM

Nothing fancy but I'll share anyway:

Flybarless stock skyscraper hub ;-)
BeastX Microbeast v2
Stock Motor + 16-tooth pinion
MSH YGE 60A (stock)
Cyclic: JR 287MG
Tail: JR DS3500G
Spektrum AR6200e
EXI FRP 325mm + stock tail blades
Zippy Flightmax 3S 2200mAh 25C

Wish I would have found the Mini-P a long time ago. It's a great heli.

Sao · 08-05-2011, 08:02 AM

Mini Vbar 5.1
Short FBL Head
Stock Motor and Pinion
MSH YGE 60A
Cyclic MKS DS95
Tail MKS DS95i
Stock Main and tail blades for now but have some Edge FBL blades to use
Rock amp 2200 - 2500 3S cells

Neilduc · 08-05-2011, 10:11 PM

BeastX V2
JR Sat
Cyclic MKS DS95
Futaba 9257
MSH 40118-1300kv
CC Ice50
CC 10A BEC
6s 1300mah
SAB 325 main blade
align 450 tail blade and tail fin.

Picofly · 08-11-2011, 02:50 PM

Here is my MiniProtos FBL:

Vbar Mini & DSMX satellite receiver
Hitec 5065MG on cyclic
Ino-Lab HG-D261HB on tail
Batteries 3S 2650 Nanotechs
Fusuno yellow racing canopy & yellow tail fins, white Trex 450 PRO landing gear

AUW 830g, flies like a dream!

ChadL · 08-16-2011, 12:59 PM

Quote:

Originally Posted by Picofly

Here is my MiniProtos FBL:

Vbar Mini & DSMX satellite receiver
Hitec 5065MG on cyclic
Ino-Lab HG-D261HB on tail
Batteries 3S 2650 Nanotechs
Fusuno yellow racing canopy & yellow tail fins, white Trex 450 landing gear

AUW 830g

How do you like the nanotech batteries?

02-16-2011, 04:34 PM	#21 (permalink)
integy2 Registered Users Join Date: Jun 2008	MicrobeastX 2221-1650kv Ice 50 1200mAh 6S Edge 3500G After 4.20mins All temp. good 118F - motor 86F - ESC 91F - Batts. http://rc.runryder.com/helicopter/rr...s=-Welcome.txt Last edited by integy2; 02-17-2011 at 08:21 PM..

03-01-2011, 11:41 PM	#22 (permalink)
bigballajeff Registered Users Join Date: Jul 2009 Location: Omaha, NE	converted my flybarred mini to fbl and it was my first fbl heli and i must say, i thought this was a great heli flybarred but i actually like it more now its fbl....heres my setup Stock motor and esc align 410m's on cyclic 3500g on the tail sab blades minivbar Voltz 3s 2200mah 45c batteries... __________________ Scorpion Motors XPERT Servos Lynx

03-08-2011, 09:43 AM	#23 (permalink)
killermolly Registered Users Join Date: Nov 2009	? I'm going to use HS-5065mg servos and a microbeast. My ? is do I put the ball on the servo horn at 15mm from the horn screw? __________________

04-05-2011, 07:39 PM	#26 (permalink)
visionplay Registered Users Join Date: Sep 2007	Building one now with the following setup -Stock Motor / ESC combo -MKS 95's on Cyclic -9257 on Tail -Mini Vbar 5.1 pro -Thunder power 3s 65C 2250mah -17t Pinion Hoping to run a headspeed of around 3300-3400rpm. Cannot wait till its maiden, should be good. __________________ John Logo 600, Vbar, Jive 80HV, Pyro 700, BLS. Synergy N5, OS55, Vbar Mini Protos FBL, Vbar, YGE, 3S TP 65c's.

05-18-2011, 07:00 PM	#28 (permalink)
AcidDrink Registered Users Join Date: Oct 2010	After long moaning over decision and deciding that a 600 needs to wait a couple of months, Mini Protos is on its way. Setup: Mini Protos Carbon kit YGE+Scorpion+SAB MSH41501 Hitec HS5065MG Digital Servo HS5065MG x3 Futaba BLS257 Brushless Digital Mini Servo P-SBL257 Voltz 2200mAh 3S 11.1V 35C Lipo Pack VT220035C3S Waiting for Futaba CGY750 to get back in stock... p.s. can you run BLS257 @ 5.5V? __________________ TDR/VBar Logo 600SX 12s VBar MSH MINI PROTOS/CGY750

03-08-2011, 10:12 AM	#24 (permalink)
michael88997 Registered Users Join Date: Mar 2008 Location: Denton, TX	I'm using the 410's and I have them at 15mm and it works great, I get the blue light at 6deg

04-10-2011, 11:25 PM	#27 (permalink)
brtmac Registered Users Join Date: May 2008	Turnigy H2218 2100Kv16T CC Ice 50 Lite Spektrum H3000 cyclic Futaba 9650 tail Minibeast w/Spektrum Sat Turnigy Nanotech 2200 3s/4s Running 2400/3s 3000/4s

06-27-2011, 03:49 AM	#30 (permalink)
Ride Registered Users Join Date: Feb 2011	Just converted my mini to FBL. stock motor CC Ice lite 50 esc stretch kit Radix 350mm FBL blades hs-65mg s9257 Microbeast Im loving this thing right now! With the radix 350 fbl blades I even had a perfectly successful auto despite people saying that the single belt system is not suited for autos. __________________ MSH Mini Protos 4s stretch with Beastx!

07-18-2011, 04:37 AM	#31 (permalink)
vs0587 Registered Users Join Date: Jul 2010	My Mini Protos Flybarless setup is as follows: Align 3GX Spektrum AR600 Hitec HS-5065 Digital Metal Gear Servos (cyclic) Align DS520 (tail) Motor, ESC and blades (kit suppled stock) Flybarless hub low MSH41103 I'll try this configuration next week end![/QUOTE]

07-18-2011, 05:08 AM	#32 (permalink)
baui2000 Registered Users My HF Map location Join Date: Nov 2010	Occurs to me I didn't share, shame on me Here goes: Stretch MiniP with lowered FBL hub BeastX Microbeast v2 Scorpion 2221-12 / 14T pinion MSH YGE 60A Cyclic: Savox SH-0257MG Tail: Savox SH-0253 Spektrum AR8000 + 1 Satellite Radix 350mm FBL + stock tail blades Zippy Flightmax 4S 2200mAh 40C I want to change to Microbeast v3 with a DSMX satellite and buy a couple other FBL blades to try out this summer. __________________ *Tom* RCHN#233 \| Lynx Heli Innovations Team Goblin 700 Carbon \| Protos Max \| Goblin 570

07-18-2011, 11:33 AM	#33 (permalink)
ChadL Registered Users Join Date: Apr 2011	Futaba CGY750 FBL controller (I run this on my 550e as well) Futaba 6203SB receiver (nice and small) Updated low profile FBL Head Hitec 5065s on the cyclic Futaba BLS 257 on the tail Stock motor and pinion (16T) CC Ice 50A ESC EDGE FBL blades __________________ Minicopter Diabolo-14s-Pyro 800-Kosmik-Vbar Voodoo 400 SK540

07-19-2011, 12:48 AM	#35 (permalink)
Millo Registered Users Join Date: Sep 2006	My Mini Protos Flybarless setup : BeastX Microbeast v2 + Satellite with adapter Motor and blades - stock ESC - Kontronik JAZZ 40 (waiting for YGE) Cyclic - Savox SH-0257MG Tail - Savox SH-1257MG Voltz 3S 2200mAh 45C lipos Last edited by Millo; 07-21-2011 at 02:06 AM..

07-19-2011, 08:02 AM	#36 (permalink)
exit44rc Registered Users Join Date: Jan 2010	Nothing fancy but I'll share anyway: Flybarless stock skyscraper hub ;-) BeastX Microbeast v2 Stock Motor + 16-tooth pinion MSH YGE 60A (stock) Cyclic: JR 287MG Tail: JR DS3500G Spektrum AR6200e EXI FRP 325mm + stock tail blades Zippy Flightmax 3S 2200mAh 25C Wish I would have found the Mini-P a long time ago. It's a great heli. __________________ Prôtos 500, Nano CPx

08-05-2011, 08:02 AM	#37 (permalink)
Sao Registered Users Join Date: Apr 2004	Mini Vbar 5.1 Short FBL Head Stock Motor and Pinion MSH YGE 60A Cyclic MKS DS95 Tail MKS DS95i Stock Main and tail blades for now but have some Edge FBL blades to use Rock amp 2200 - 2500 3S cells __________________ Goblin 500 V-Bar, Goblin 380 V-Bar,T-Rex 500 V-Bar Align Cobra Fuz, E-Flite Blade 180CFX, TBS Gemini FPV, CYE Stingray FPV, some planks.

08-05-2011, 10:11 PM	#38 (permalink)
Neilduc Registered Users Join Date: Feb 2010	BeastX V2 JR Sat Cyclic MKS DS95 Futaba 9257 MSH 40118-1300kv CC Ice50 CC 10A BEC 6s 1300mah SAB 325 main blade align 450 tail blade and tail fin.

08-11-2011, 02:50 PM	#39 (permalink)
Picofly Registered Users Join Date: Dec 2008	Here is my MiniProtos FBL: Vbar Mini & DSMX satellite receiver Hitec 5065MG on cyclic Ino-Lab HG-D261HB on tail Batteries 3S 2650 Nanotechs Fusuno yellow racing canopy & yellow tail fins, white Trex 450 PRO landing gear AUW 830g, flies like a dream! Attached Thumbnails __________________ Goblin 420 Sport, Goblin Fireball Competition HD FPV setups with DJI Ocusync video links. Last edited by Picofly; 08-22-2011 at 12:10 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in