START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Century Century Helicopters Support |
|
LinkBack | Thread Tools | Display Modes |
04-06-2014, 10:05 PM | #1 (permalink) |
Registered Users
Join Date: Sep 2010
|
Century Predator
I got a century predator Gasser flown it multi times no issues. Today I went to the field and nearly bought the farm. First I thought it was the wind but through some troubleshooting. I notice the elevator servo jumps at half throttle it was intermittently. The frame is all metal with spacers separate the servo. What can I do to correct this situation?
|
Sponsored Links | |||
Advertisement |
|
04-06-2014, 10:20 PM | #2 (permalink) |
Registered Users
|
Make sure the plug boot is tight on the spark plug, also make sure wiring is well away from the plug wire. If that is all ok try changing out the spark plug . This is assuming it is ignition related interference . Make sure all radio wiring is good and also check that the servo is just not bad. Sort of sounds like a ignition interference issue though .
Be careful will testing it .
__________________
Rycroft Wings & Blades (MAAC Club) Rotor-Tech Blades |
Thread Tools | |
Display Modes | |
|
|