Walkera TX/RX Setup Guides with Pictures and Video

[indiggio]

Originally Posted by CX2Pilot

Go into the following menu and set to these settings.

MODEL - OUTPU

AUX2
AUX2

AUX2
GYRO


FUNCTION - GYRO

MODE- MANU

SWITC - FMD

POS 0
34.0% = 6 axis mode - Red light on Ladybird

POS 1
66.0% = 3 axis mode - Green light on Ladybird

_____________________________


DREXP

Pos 0: ELEV D/R - 80% EXP +30% > You can use much less D/R and more Expo if you need to.
Pos 0: AILE D/R - 80%, EXP +30%
Pos 0: RUDD D/R - 100% EXP LIN

Pos 1: ELEV D/R - 100% EXP +30%
Pos 1: AILE D/R - 100%, EXP +30%
Pos 1: RUDD D/R - 100%, EXP LIN

If you want more agressive 3D mode try these settings.

Pos 1: ELEV D/R - 110% % EXP LIN
Pos 1: AILE D/R - 110%, EXP LIN
Pos 1: RUDD D/R - 120%, EXP -20 % > You can even try 150% for RUDD and more negitave EXP for fast rudder response.

I just received my Ladybird and am trying to configure up my Devo 10 using your instructions, but I'm a bit confused by some of them. Hoping you can help with a bit of clarification? Most of the settings I get, thanks so much for them!
A couple just don't compute.

I want to use the FMOD switch to switch between flight modes. I see that seems to work as LED on Ladybird changes with switch.

What doesn't make sense to me is this part:

MODEL - OUTPU

AUX2
AUX2

AUX2
GYRO


FUNCTION - GYRO

MODE- MANU

SWITC - FMD

I can't seem to match it to the Devo 10 menu system. If you could clarify that a bit, that would be super!


Another question I have is with the DR/EXP setup.
For Pos 0 & Pos 1, do you actually flip the corresponding switches on the Devo 10 associated with the function (ELEV D/R, AILE D/R, RUDD D/R) or are those different Pos settings somehow tied to the FMOD switch, so that the DR/EXP settings switch based on the FMOD switch and not each of the function switches?
I typically use the AILE D/R switch as my throttle hold (I keep my middle finger resting on it ready to flip it whenever necessary).


One more. Do the AUX4 and AUX5 dials actually do anything with the LB?

Thanks!

[boxhead]

I found CX2's setup for the ladybird qr worked very good, mine came with devo7 with a major problem in when I flipped the fmod inthe ladybird would go to full throttle!
I got it set right, but being slow( ok dumb) I kept missing fmod switch doing anything but changing led on FC. Then read your guide, and understanding my devo7 came from YOUR instructions.
Thanks.
I got ( finially ) the hotenX, BNF. And used your ladybirdQR as starting point!

What I don't get, is why would brushled FC settings on tx work on with Brushless FC ?
I know the tx isn't caring what it's controlling, the FC just wants to either stablalize with 3 or 6 axis, Im not putting the words right to say what i mean. It's not like I would use these settings on my x650, other than have similar yaw/rudder expo in positive and ele/ale expo in negative,

[CX2Pilot]

Originally Posted by ohioshooter

Hi, Do any of you have the full settings for 2801 and cb100 double brushless that has the RX2436.

Thanks

You should be able to use my CB100 setup guide with the RX2406 for the RX2436.
Create a new model or reset a current one.
Use the settings I listed. All the other settings are at there default settings.
This is why I didn't make a full setup guide as you only need to change
a few settings from the defaults.

For DR/EXPO you can try these settings.


DR&EXP:

Set D/R and EXPO to your personal needs/preference.
These should be good for beginners.
You can set more or less than 70% D/R if you want and more
or less than +30% EXPO if you want.


ELEV D/R - 70% EXP +30%

AILE D/R - 70%, EXP +30%

RUDD D/R - 100%, EXP LIN *



Tom

[CX2Pilot]

Originally Posted by rldeveer

Tom
I have found your beginner and other guides very usefull and am about to move up to BL. I don't see a guide for a C05 BL GCP w/ 2801.
Can your #16 setup guide for MiniCP with "C05 BL" be used for my 2801 Genius that
has been converted to a Mini?
Would the 50% TC still = 90% throttle on the 2801/WK GCP or was that specific to the Devo/Mini?
What would you suggest using for pot settings on the GCP WK RX for this setup.

Thanks,
RD
??????Where did he go?????

RD,

I'm glad my setup guides were able to help you out.

Q: Can your #16 setup guide for MiniCP with "C05 BL" be used for my 2801 Genius that has
been converted to a Mini?

A: Yes. The setup guides are the same for the Genius CP and Mini CP both brush
and brushless. I listed them separate so I can find tune and tweek them if needed.
I used one setup guide for the GCP and MCP both brush and brushless.

Q: What would you suggest using for pot settings on the GCP WK RX for this setup.
A: I used the factory defaults which worked well for me. On the GCP I turned up the servo ext.


Q: ??????Where did he go?????[/QUOTE]
A: I don't go on the forums much anymore...


Tom

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[rldeveer]

Originally Posted by CX2Pilot

RD,

I'm glad my setup guides were able to help you out.

Q: Can your #16 setup guide for MiniCP with "C05 BL" be used for my 2801 Genius that has been converted to a Mini?

A: Yes. The setup guides are the same for the Genius CP and Mini CP both brush
and brushless. I listed them separate so I can find tune and tweek them if needed.
I used one setup guide for the GCP and MCP both brush and brushless.

Q: What would you suggest using for pot settings on the GCP WK RX for this setup.
A: I used the factory defaults which worked well for me. On the GCP I turned up the servo ext.


Tom

Tom
Thanks for the response.
The ST1 50% flat TC = 90% throttle doesn't make sence to me but does give a nice very melow flight. I think it is well below 90% on my 2801/MGCP BL.

I use your #21 indoors, and am proggessing from #24 to #15 and then #16 in due time.
My biggest problem is still nose in. I can sit in one place all day long in all other orientations, but lose it as soon as the nose comes around. Dumb Thumbs.
Regards
RD

[CX2Pilot]

Your welcome RD.

The ST1 50% flat TC = 90% throttle we think has to do with how the throttle programming is
done in the 3 axis RX firmware.
On the Walkera non 3 axis RX I have found that 90% TX throttle gives you 90% actual motor throttle.

On the Blade mCPX which has the 3 axis RX I found this out.

With the thesteve mCPX version I had to set the TX throttle to 20% across to get 85% actual motor throttle
in ST-1 for indoor flying.
Connected the yellow wire to the main motor output pin on the 3in1.

With the regular thesteve when I set the TX throttle to 80% across I got 85% actual motor throttle.
Soldered the yellow wire to the back of the 3in1 on the tiny resistor.


Nose in tricky. It is the hardest for me to do also.


Tom

[jordan57]

I just received my first CP heli, a Master CP from RC711.com
Walkera recommended using their downloaded minicp.bin as a starting point for the Master....their settings are very similar.
Once off the ground, the copter spins like there is no rudder control. On second try I applied some opposite rudder, which had no effect. It was all I could do to get it down without injury.
Do you have any ideas of cause. I'm working with the techs at RC711, but would like some real ammunition.
Thanks,

[CX2Pilot]

The #1 thing to check is the gyro gain.
If it is too low the tail will not hold and the heli will spin.
Set gyro gain at 82% to start with and adjust more or less as needed.
Also make sure the rudder (RUDD) is set correctly in the TX reverse menu.
It should be set at NORM if it is like the Mini CP.

On the heli you may have a bad tail motor, bad tail motor connection,
stripped teeth on a gear, bad tail blade (bent or cracked) or the tail blade may be slipping on the shaft.
Also the pinion on the tail motor could be slipping.

This is everything I can think of at the moment.


Tom

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[Heishley]

Hi cx2pilot,

I cant seem to find a setup for V100D03BL with 2603 tx and rx2620.
Appreciate if you could help me with the beginner and advance settings for 3D.

Thanks in advance sir.

[CX2Pilot]

Hi,

I don't have the 2603 TX, just have the WK-2801 Pro.
The 2603 has limited programming but you can
use the D/R switch, EXPO, and PIT/PLT adjustments for beginner and
advance settings. You will have to program them for beginner
or 3D flying, you can't do it for both like you can with the WK-2801.
This will be turning knobs until you get the response you want.
There are no value screens for them so I can't give you some values to try.

The V100D03BL owners manual should have the setup for your 2603 TX.



Tom

[Heishley]

Hi tom,

Guess i have to play around with the tx which kinda frustating to do.
Anyway thanks for your fast response.
This is a great place with tons of information for walkera heli settings.

Cheers,

Heishley

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[Heishley]

Hi tom,

Yeah it works now!! Its flying great with some 3d moves now. Got to tweak more to perform better. Thanks for your tips on the setup.

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar

[CX2Pilot]

Dear William,

I noticed you still have posted my setup guides on your web site. I wanted you to know that I am currently selling my guides for a nominal fee on my website, . The content on your site is under copyright.

I kindly request that you remove my setup guides and please do not publish any new content of mine that users may try to post as it is all under copyright.

In return, I will occasionally post on your site important technical information your users can benefit from.

After years of helping people for no charge, I am at a point I need to generate some funds to cover the costs to continue providing useful information to this hobby.


My Helifreak user name is: CX2Pilot


Here are links to my setup guides on your site. The first one has 4 pages of my setup guides posted. The second one has 2 pages of my setup guides posted.


https://www.helifreak.com/showthread.php?t=400204


https://www.helifreak.com/showthread.php?t=399727



I appreciate your cooperation.


Sincerely,

Tom Zadar