Futaba 14SG & R7008???

[dpelletier]

I have two very specific questions for the Skookum followers currently using the Futaba 14SG radio.

The 14SG manual, page 32, clearly states that telemetry works only when using FASSTest 14CH mode. (12CH mode displays only Receiver battery voltage and Extra battery voltage.)

Forum post complaints have been that the Skookum does not recognize the sbus connection when FASSTest 14CH is used but works when using FASSTest 12CH.

Question 1-
Is anybody using sbus with FASSTest 14CH on an SK720 or SK540?

Question 2-
Is anybody using Receiver battery voltage and Extra battery voltage telemetry with the FASST 12CH on an SK720 or SK540?

Thanks

[airton]

I'm using without problems with the data and alarms for voltages coming from the RX and the main battery.

If you want to use with the SK720 Blue, you will have to use the adapter sold separately.

If you use the SK720 BE or SK540 , just plug it in the port specified in the manual.

In both cases, I fed the RX and SK with two wires coming out of the Castle BEC PRO that I'm still using, but I think the possibility to exchange it, because some troubling information that we are finding in the analysis of log that I posted in another thread.

I had a problem with high signal loss logs too. Today I found the cause and I´m preparing the material with the solution which I found to the case, to post in that thread.

You can use without worries.

Regards,

Airton

[dpelletier]

Thanks for the info.
Could you please post a link here to your other thread you mentioned, you've got me curious now.

Sent from my SCH-I605 using Tapatalk

[omerco]

https://www.helifreak.com/showthread.php?t=587802

[airton]

Originally Posted by omerco

https://www.helifreak.com/showthread.php?t=587802

I was referring to this thread:

https://www.helifreak.com/showthread.php?t=597948

Sorry for the delay, but I've been busy and I was thinking about putting more material on the topic before reporting it here, but for the time difference, I could only do it now.