Register Now

f.a.r.m.e.r · 10-31-2012, 09:37 AM

Nice flight Chris!

jlharv · 10-31-2012, 09:24 PM

Some gym flyin' Trying to work out which zoom to use on the gopro and learning how to follow the heli with my head as a tripod. I tend to follow with my eyes not my whole head. But I am getting better

I see that I need to switch to the open back so I can get more sound in. The closed back on there works fine for on board stuff because it is so loud.

edubu · 11-02-2012, 07:02 AM

My Nano

[ame]http://www.youtube.com/watch?v=jebHODzxqUw&feature=youtube_gdata_player[/ame]

tntburnett · 11-04-2012, 01:05 AM

Here is my bl nano mild kit on 68% this thing is sick.

Be blessed
Isaac

[ame]http://www.youtube.com/watch?v=nEYmMBQ50I4&feature=youtube_gdata_player[/ame]

Sent from my Galaxy Nexus using Tapatalk 2

f.a.r.m.e.r · 11-04-2012, 03:20 AM

Quote:

Originally Posted by tntburnett

Here is my bl nano mild kit on 68% this thing is sick.

Be blessed
Isaac

http://www.youtube.com/watch?v=nEYmM...e_gdata_player

Sent from my Galaxy Nexus using Tapatalk 2

Nice Isaac! When you going to drop a hp08 in it? LoL!!

cerval06 · 11-04-2012, 06:35 AM

Nice TNT !!! all the time !!!

tntburnett · 11-04-2012, 07:42 AM

Quote:

Originally Posted by f.a.r.m.e.r

Nice Isaac! When you going to drop a hp08 in it? LoL!!

Lol if it will fit u know it would be in there

Be blessed
Isaac

Quote:

Originally Posted by cerval06

Nice TNT !!! all the time !!!

Thank u

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk 2

cerval06 · 11-04-2012, 12:34 PM

hi,

I dont have enought money for buy one for the moment.
I had an idea :
Take my hp05s from my mcpx, with the 10A esc.
Its not a blheli flashing. I dont have a governor on, but i have 3mode on my esc for the head speed :

Advance Timing: Low / Middle / High, default is Middle.
Low advance, is for high inductance and low KV value motors.
High advance, is for low inductance and high KV value motors.
For some high Kv motors, if it shakes while rotating in high speed, then “High” mode is recommended.

Is it possible me for me to translate ? i have also 3 sorts of throttle curve setting possibility on esc.

salsaketchup · 11-05-2012, 06:23 PM

Just having some fun with the Nano's

cerval06 · 11-05-2012, 06:39 PM

This question was for TNT or other could be reply me :
TNT i would like to post on your channel but it was too long....
I talk about your nanocpx mod. (my english is so bad sorry)

hi,

I dont have enought money for buy one for the moment.
I had an idea :
Take my hp05s from my mcpx, with the 10A esc.
Its not a blheli flashing. I dont have a governor on, but i have 3mode on my esc for the head speed :

Advance Timing: Low / Middle / High, default is Middle.
Low advance, is for high inductance and low KV value motors.
High advance, is for low inductance and high KV value motors.
For some high Kv motors, if it shakes while rotating in high speed, then “High” mode is recommended.

Is it possible me for me to translate ? i have also 3 sorts of throttle curve setting possibility on esc.

tntburnett · 11-05-2012, 08:14 PM

Quote:

Originally Posted by cerval06

This question was for TNT or other could be reply me :
TNT i would like to post on your channel but it was too long....
I talk about your nanocpx mod. (my english is so bad sorry)

hi,

I dont have enought money for buy one for the moment.
I had an idea :
Take my hp05s from my mcpx, with the 10A esc.
Its not a blheli flashing. I dont have a governor on, but i have 3mode on my esc for the head speed :

Advance Timing: Low / Middle / High, default is Middle.
Low advance, is for high inductance and low KV value motors.
High advance, is for low inductance and high KV value motors.
For some high Kv motors, if it shakes while rotating in high speed, then “High” mode is recommended.

Is it possible me for me to translate ? i have also 3 sorts of throttle curve setting possibility on esc.

Hi. You can't use the hpo5 in the nano it won't the frame. The good thing about running the flashed you don't need the steve converter to use the use plus the gov. U can use the esc on the nano if you was using on the mcpx but the hpo5 you can't use it. Its to big and it won't fut the frame.

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk 2

cerval06 · 11-05-2012, 09:07 PM

Ok, Tnt thx so much !

Heli biggie · 11-10-2012, 07:36 PM

I have a long way to go but here is a flight from today.

[ame]http://www.youtube.com/watch?v=GHDt9UVRHqI&feature=youtube_gdata_player[/ame]

crockettjb · 11-11-2012, 10:50 AM

Mine at the gym. Nothing spectacular. Shot by my 8 year old, you might need some Dramamine before watching:eek:

[ame]http://www.youtube.com/watch?v=fVxpb15epuI&feature=youtube_gdata_player[/ame]

Sent from mu phone usin mu dumb thumbs.

jchandler · 11-11-2012, 05:06 PM

[ame]http://www.youtube.com/watch?v=Y0pJTqZc9lc[/ame]

skeppley · 11-15-2012, 02:47 PM

The wife told me to quit playing and sweep the floor.
Who says you cant do both

[ame]http://www.youtube.com/watch?v=b7rkgrZtEFc&feature=channel&list=UL[/ame]

tntburnett · 11-15-2012, 08:06 PM

Quote:

Originally Posted by skeppley

The wife told me to quit playing and sweep the floor.
Who says you cant do both

http://www.youtube.com/watch?v=b7rkg...hannel&list=UL

That's one way to do it lol

Be blessed
Isaac

Sent from my A100 using Tapatalk 2

Heli biggie · 11-16-2012, 08:20 PM

Ya eat that , wife! I like how you just pushed the dirt under the couch. Its either that or the rug right? Thats awesome control, i will get there one day.

Quote:

Originally Posted by skeppley

The wife told me to quit playing and sweep the floor.
Who says you cant do both

http://www.youtube.com/watch?v=b7rkg...hannel&list=UL

skeppley · 11-16-2012, 09:10 PM

LOL, yeah, pretty much pushed it all to the sides of the room

As long as nobody bends down, it at least look clean

Crash_Expert · 11-17-2012, 08:15 PM

Quote:

Originally Posted by RCFlyer88

3Ding the Nano:

http://www.youtube.com/watch?v=7zd7I...--x065Hw6N7Uow

that thing is a dragonfly on crack

10-31-2012, 09:37 AM	#121 (permalink)
f.a.r.m.e.r Registered Users Join Date: Oct 2011	Nice flight Chris! __________________ Compass 7HV Mini V MKS Trex 450 Pro V2 DFC 6s Mini V Savox Ice 50 lite[COLOR="rgb(75, 0, 130)"][/COLOR] Blade 130x Mcpx Nano Cpx BL Gaui X5 mini V

10-31-2012, 09:24 PM	#122 (permalink)
jlharv Registered Users My HF Map location Join Date: Mar 2007	Some gym flyin' Trying to work out which zoom to use on the gopro and learning how to follow the heli with my head as a tripod. I tend to follow with my eyes not my whole head. But I am getting better I see that I need to switch to the open back so I can get more sound in. The closed back on there works fine for on board stuff because it is so loud. __________________ John nCPX , 130x, DJI f450 5.8 GHZ FPV, T-Rex 500ESP DS510, mini VBar, 13T T-Rex 600ESP 12s, scorpion 4025 630, VBar, DS650, DS610, 14T- T-Rex 700E V2 VBar

11-04-2012, 01:05 AM	#124 (permalink)
tntburnett Blade Forum Support Join Date: Feb 2009	Here is my bl nano mild kit on 68% this thing is sick. Be blessed Isaac [ame]http://www.youtube.com/watch?v=nEYmMBQ50I4&feature=youtube_gdata_player[/ame] Sent from my Galaxy Nexus using Tapatalk 2 __________________ Jesus Rep Its all Good,Its all GOD FPV Everything Now GOD BLESS

11-05-2012, 06:23 PM	#129 (permalink)
salsaketchup Registered Users Join Date: Mar 2011	Just having some fun with the Nano's __________________ T-rex 500ESP - DFC (Scorpion 3026-1900Kv, 6s, CC Ice 100A, AR7200BX, SAB430), 130 X (EOX1101), mCP X BL, Nano CPX, mCP X (XP-12a, HP05s, Dual Tail), mSR X, mSR, DX8

11-10-2012, 07:36 PM	#133 (permalink)
Heli biggie Registered Users My HF Map location Join Date: Jul 2011	I have a long way to go but here is a flight from today. [ame]http://www.youtube.com/watch?v=GHDt9UVRHqI&feature=youtube_gdata_player[/ame] __________________ TREX 800 DFC PRO HV , TREXIKON 600 EFL PRO , LEAP 3D QUADCOPTER

11-02-2012, 07:02 AM	#123 (permalink)
edubu Registered Users Join Date: Jun 2010	My Nano [ame]http://www.youtube.com/watch?v=jebHODzxqUw&feature=youtube_gdata_player[/ame]

11-04-2012, 06:35 AM	#126 (permalink)
cerval06 Registered Users Join Date: Oct 2012	Nice TNT !!! all the time !!!

11-04-2012, 12:34 PM	#128 (permalink)
cerval06 Registered Users Join Date: Oct 2012	hi, I dont have enought money for buy one for the moment. I had an idea : Take my hp05s from my mcpx, with the 10A esc. Its not a blheli flashing. I dont have a governor on, but i have 3mode on my esc for the head speed : Advance Timing: Low / Middle / High, default is Middle. Low advance, is for high inductance and low KV value motors. High advance, is for low inductance and high KV value motors. For some high Kv motors, if it shakes while rotating in high speed, then “High” mode is recommended. Is it possible me for me to translate ? i have also 3 sorts of throttle curve setting possibility on esc.

11-05-2012, 06:39 PM	#130 (permalink)
cerval06 Registered Users Join Date: Oct 2012	This question was for TNT or other could be reply me : TNT i would like to post on your channel but it was too long.... I talk about your nanocpx mod. (my english is so bad sorry) hi, I dont have enought money for buy one for the moment. I had an idea : Take my hp05s from my mcpx, with the 10A esc. Its not a blheli flashing. I dont have a governor on, but i have 3mode on my esc for the head speed : Advance Timing: Low / Middle / High, default is Middle. Low advance, is for high inductance and low KV value motors. High advance, is for low inductance and high KV value motors. For some high Kv motors, if it shakes while rotating in high speed, then “High” mode is recommended. Is it possible me for me to translate ? i have also 3 sorts of throttle curve setting possibility on esc.

11-05-2012, 09:07 PM	#132 (permalink)
cerval06 Registered Users Join Date: Oct 2012	Ok, Tnt thx so much !

11-11-2012, 10:50 AM	#134 (permalink)
crockettjb Registered Users My HF Map location Join Date: Jan 2011	Mine at the gym. Nothing spectacular. Shot by my 8 year old, you might need some Dramamine before watching:eek: [ame]http://www.youtube.com/watch?v=fVxpb15epuI&feature=youtube_gdata_player[/ame] Sent from mu phone usin mu dumb thumbs. __________________ http://www.youtube.com/user/Springfi...e=results_main

11-11-2012, 05:06 PM	#135 (permalink)
jchandler Registered Users Join Date: Jan 2011	[ame]http://www.youtube.com/watch?v=Y0pJTqZc9lc[/ame]

11-15-2012, 02:47 PM	#136 (permalink)
skeppley Registered Users My HF Map location Join Date: Oct 2006	The wife told me to quit playing and sweep the floor. Who says you cant do both [ame]http://www.youtube.com/watch?v=b7rkgrZtEFc&feature=channel&list=UL[/ame] __________________ Trex600 12S/ Trex600 8S/ Trex600 10S/ Trex 500 pro x2/ Trex 450 x 2/ MX400 x 2/ Shogun 400 x2/ Century 3D Pro/ MCPX x4/ MSR/ Nano CPX brushless x2/ GWS Cobra/180CFX/Goblin 380 Lynx Heli Innovations Team Pilot

11-16-2012, 09:10 PM	#139 (permalink)
skeppley Registered Users My HF Map location Join Date: Oct 2006	LOL, yeah, pretty much pushed it all to the sides of the room As long as nobody bends down, it at least look clean __________________ Trex600 12S/ Trex600 8S/ Trex600 10S/ Trex 500 pro x2/ Trex 450 x 2/ MX400 x 2/ Shogun 400 x2/ Century 3D Pro/ MCPX x4/ MSR/ Nano CPX brushless x2/ GWS Cobra/180CFX/Goblin 380 Lynx Heli Innovations Team Pilot

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in