START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
nano CP X Blade nano CP X Helicopters Information and Help |
|
LinkBack | Thread Tools | Display Modes |
12-18-2012, 04:16 PM | #1 (permalink) |
Registered Users
Join Date: Nov 2012
|
Main Gear/Shaft glue?
When I bought it new there was some black "glue" on the main shaft under the main gear.
To keep the main gear in corret position. Can you buy this any where? Thanks! |
Sponsored Links | |||
Advertisement |
|
12-18-2012, 08:15 PM | #2 (permalink) |
Registered Users
Join Date: Feb 2012
|
I think it is very similar to Liquid Tape, available at Home Depot and probably similar stores. Liquid tape works well because I have to scrape some of it off when I do want to remove the gear.
|
12-18-2012, 08:17 PM | #3 (permalink) |
Registered Users
Join Date: Jul 2011
|
You can use a bunch of stuff for that:
|
12-20-2012, 04:55 PM | #4 (permalink) |
Registered Users
Join Date: Aug 2011
|
Hi,
after installing the AD Mild Kit I havenīt glued the main gear. It works |
12-21-2012, 01:42 PM | #6 (permalink) |
Registered Users
Join Date: Aug 2012
|
Bees wax or R/C56
I cannot say whether it works on helis, but bees wax is a superb adhesive for non permanent joints. R/C 56 was desighned to glue canopies onto R/C aircraft only drying to a high tach non permanent bond. With my helis i would use bees wax. Good luck.
JW |
12-21-2012, 09:46 PM | #8 (permalink) |
Registered Users
Join Date: May 2012
|
I CA my main gear on too. It works fine and comes apart too just fine.
The gear fits fine with no glue. I think the reason they put that dab on there is to balance the main shaft, not to hold the gear on. The main shaft in the nano is perfectly balanced except for the main gear's flat. The rubber would solve this. I've had metal parts completely demonlished by something that was out of round before in the rotating assembly. Balance is nice even though not necessary. |
Thread Tools | |
Display Modes | |
|
|