Register Now

Robb · 03-24-2008, 08:43 PM

just bought the charger and followed the manual to charge my 1800 lipo's(set it to lipo 1800 3s) the charger keeps displaying a "no battery" message, tried other batteries and it shows the same message, tested the output leads and adapter plate for continuity and they checked out fine, am I forgetting something? the sooner I get to charge my batteries the sooner I can fly

Robb

mjws · 03-24-2008, 08:46 PM

Post a picture. Are you plugging in the balancing leads AND the main leads? You can't charge through just the balancer.

Mike

Robb · 03-24-2008, 09:16 PM

picture

mjws · 03-25-2008, 12:17 AM

Yep. You need to hook leads from the main bannana jacks on the side of your charger to the EC3 (blue) connector on your pack. This is in addition to the balancing PCB. From there you are in business.

Mike

Robb · 03-25-2008, 01:04 PM

Thanks for the info, went to my LHS and showed them your post, got a "whoops" and they fixed me right up.

Robb

03-24-2008, 08:43 PM	#1 (permalink)
Robb Registered Users My HF Map location Join Date: Feb 2008	hyperion 0606i acdc problem just bought the charger and followed the manual to charge my 1800 lipo's(set it to lipo 1800 3s) the charger keeps displaying a "no battery" message, tried other batteries and it shows the same message, tested the output leads and adapter plate for continuity and they checked out fine, am I forgetting something? the sooner I get to charge my batteries the sooner I can fly Robb __________________ Trying to get reacquainted with heli's after getting frustrated and selling everything....now have a Blade Nano CPX...gonna see how it goes and maybe get more later.

03-24-2008, 09:16 PM	#3 (permalink)
Robb Registered Users Thread Starter My HF Map location Join Date: Feb 2008	picture Attached Thumbnails __________________ Trying to get reacquainted with heli's after getting frustrated and selling everything....now have a Blade Nano CPX...gonna see how it goes and maybe get more later.

03-25-2008, 01:04 PM	#5 (permalink)
Robb Registered Users Thread Starter My HF Map location Join Date: Feb 2008	Thanks for the info, went to my LHS and showed them your post, got a "whoops" and they fixed me right up. Robb __________________ Trying to get reacquainted with heli's after getting frustrated and selling everything....now have a Blade Nano CPX...gonna see how it goes and maybe get more later.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-24-2008, 08:46 PM	#2 (permalink)
mjws Registered Users Join Date: Jan 2005	Post a picture. Are you plugging in the balancing leads AND the main leads? You can't charge through just the balancer. Mike

03-25-2008, 12:17 AM	#4 (permalink)
mjws Registered Users Join Date: Jan 2005	Yep. You need to hook leads from the main bannana jacks on the side of your charger to the EC3 (blue) connector on your pack. This is in addition to the balancing PCB. From there you are in business. Mike

Register Now

Log-in