Fury 55 Cyclic Pitch

[mcoccia]

I am setting up my Fury 55 (Flybar Ver). What numbers are you guys getting on your Ele & Ail cyclic pitch?

[Knud Pedersen DENMARK]

Hi
I dont use any FBL, yet, on my fury55.
But maybe this can help you:

http://rc.runryder.com/helicopter/t629828p1/

[callum]

EDIT:

I totally misread Flybar as Flybarless.. So ignore the below..

However, I would run as maximum as I could get out.. that would include binding at extremes.

Callum



Heya,

I run 8 Degrees Cylic as that is what Vbar requires, Depending on what Flybarless controller you use, they will have a pre-defined cyclic pitch that you must adhere to, to get the best performance out of the unit.

Regards
Callum

[Arclight338]

Swash at 50 Pitch: +/- 10 degrees , Swash at 50 Elevator:8 degrees , Swash at 50 Aileron: 8 degrees. That is conservative. I can get +/- 12 degrees in pitch and not bind up the swash plate. I did however significantly changed the link lengths in the build manual.

I don't recall exactly what I did but all the links were changed. As directed,with servos set up exactly as directed I had far too much negative pitch at mid stick.

Will hover hands off. Dead stable,with plenty of control authority for big air. I'm not much of a hard core 3D flyer. My first and definitely NOT my last MA.

[Joe Bailey]

My Ail/Elev are both at 7 degrees but there is loads more throw available on the swash for hard core 3D.

Joe

[guitarherowanab]

i have +/-12 collective, and my dual rates are srtup for 8, 7, and 6.