Register Now

vertico · 07-11-2013, 08:37 AM

If you by the main frame:

http://www.helidirect.com/gaui-nx4-c...mm-p-28937.hdx

Does that come with both sides or just one?

I'm assuming it's two haves because of the price but typically these are sold as one. Can anyone confirm who has purchased?

Blade3d · 07-11-2013, 10:05 AM

I believe it's just one side,, redicilous right

jockstrap · 07-11-2013, 10:26 AM

Are you sitting down?

I think it's per side...

Let's hope fusuno get onboard and start making them cheaper..

A little cheaper here if that helps --> http://www.flying-hobby.com/shop/nx4...m-p-11079.html

Price is high because it requires a large expensive single piece of CF to make it - has a lot of waste but that doesn't make it cheaper to produce unfortunately.

I'd be happy with a nice G10 set of frames if it meant they were half the price..

vertico · 07-11-2013, 10:29 AM

That is more than the price of 1 side frame of a Goblin 770!

There's no reason to charge $65 for a single piece side frame, that's murder.

Hopefully like jockstrap said we can get Fusuno or Lynx to make a cheaper frame.

Blade3d · 07-12-2013, 12:29 AM

Wow that is a good price great

vertico · 07-12-2013, 06:39 AM

Hopefully Gaui is listening. I bought this heli to fly the crap out of it and I know I'm going to crash it the only question is when.

07-11-2013, 08:37 AM	#1 (permalink)
vertico Registered Users Join Date: Jul 2011 Location: Colorado Springs	Main Frame Part question If you by the main frame: http://www.helidirect.com/gaui-nx4-c...mm-p-28937.hdx Does that come with both sides or just one? I'm assuming it's two haves because of the price but typically these are sold as one. Can anyone confirm who has purchased? __________________ Fusion 180 - M2 Evo - RAW 420 - Fusion 550 - Tron 5.5 - Kraken 580 - Kraken 580n - Kraken 700 - Kraken 700n - Vcontrol Evo

07-11-2013, 10:26 AM	#3 (permalink)
jockstrap Registered Users Join Date: Dec 2006	Are you sitting down? I think it's per side... Let's hope fusuno get onboard and start making them cheaper.. A little cheaper here if that helps --> http://www.flying-hobby.com/shop/nx4...m-p-11079.html Price is high because it requires a large expensive single piece of CF to make it - has a lot of waste but that doesn't make it cheaper to produce unfortunately. I'd be happy with a nice G10 set of frames if it meant they were half the price.. __________________ DX7 Mode-1 \| 450 pro 6s \| 450 pro \| Schweizer 300C Gasser Scale \| T-Rex550e \| Aeolus 50 \| HeliX T-Rex700 fbl Gasser \| HWC600 Gasser \| Henseleit MPXLe \| Henseleit 3DNT \| Suzi-Janis 700 \| Gaui NX4 \| Gaui X5 \| Blade 350QX

07-11-2013, 10:29 AM	#4 (permalink)
vertico Registered Users Thread Starter Join Date: Jul 2011 Location: Colorado Springs	That is more than the price of 1 side frame of a Goblin 770! There's no reason to charge $65 for a single piece side frame, that's murder. Hopefully like jockstrap said we can get Fusuno or Lynx to make a cheaper frame. __________________ Fusion 180 - M2 Evo - RAW 420 - Fusion 550 - Tron 5.5 - Kraken 580 - Kraken 580n - Kraken 700 - Kraken 700n - Vcontrol Evo

07-12-2013, 06:39 AM	#6 (permalink)
vertico Registered Users Thread Starter Join Date: Jul 2011 Location: Colorado Springs	Main Frame Part question Hopefully Gaui is listening. I bought this heli to fly the crap out of it and I know I'm going to crash it the only question is when. __________________ Fusion 180 - M2 Evo - RAW 420 - Fusion 550 - Tron 5.5 - Kraken 580 - Kraken 580n - Kraken 700 - Kraken 700n - Vcontrol Evo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2013, 10:05 AM	#2 (permalink)
Blade3d Registered Users Join Date: Feb 2009	I believe it's just one side,, redicilous right

07-12-2013, 12:29 AM	#5 (permalink)
Blade3d Registered Users Join Date: Feb 2009	Wow that is a good price great

Register Now

Log-in