Register Now

vernon7026 · 07-12-2010, 03:20 PM

Hi all

What thickness is the raptor 90 se main shaft ?? I want to buy a leveling tool that will fit the shaft ?

Any suggestions ??

regards

capebob · 07-12-2010, 03:25 PM

A swash leveling tool will probably be hard to find on your Raptor 90 because the main shaft diameter is 11mm. The swash on a Raptor 90 is easy enough to level without a tool.

Bob

seanh · 07-20-2010, 09:59 PM

I was looking for the same thing and never did find one. But really didn't need one after all. I adjusted the links as per the manual and that was it. Just kind of eyeballed it and it was basically perfect.

fixnfly70 · 07-21-2010, 02:20 AM

Them raptors are easy to set up........an eyeball look here, a tweek there, and usually within real close to neutral lift off...... I'm sold.....

seanh · 07-22-2010, 07:32 PM

don't know if this will work or not.
http://cgi.ebay.com/Swashplate-Level...item3a5d2045ea

if it's too large a hole then maybe get some aluminum tubing and make a bushing

07-12-2010, 03:20 PM	#1 (permalink)
vernon7026 Registered Users Join Date: May 2008	main shaft thickness Hi all What thickness is the raptor 90 se main shaft ?? I want to buy a leveling tool that will fit the shaft ? Any suggestions ?? regards

07-12-2010, 03:25 PM	#2 (permalink)
capebob Registered Users My HF Map location Join Date: Apr 2004	A swash leveling tool will probably be hard to find on your Raptor 90 because the main shaft diameter is 11mm. The swash on a Raptor 90 is easy enough to level without a tool. Bob __________________ Samuel Adams field rep Buffalo Wings field rep Success is the ability to go from one failure to another with no loss of enthusiasm. Churchill

07-20-2010, 09:59 PM	#3 (permalink)
seanh Registered Users Join Date: Feb 2007	I was looking for the same thing and never did find one. But really didn't need one after all. I adjusted the links as per the manual and that was it. Just kind of eyeballed it and it was basically perfect. __________________ X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910

07-21-2010, 02:20 AM	#4 (permalink)
fixnfly70 Registered Users Join Date: Mar 2010	Them raptors are easy to set up........an eyeball look here, a tweek there, and usually within real close to neutral lift off...... I'm sold..... __________________ Raptor 90SE - OS91SX-H - GY611 - 9CHP Raptor 90 3D - YS91SR-GY611-CY atg V3 Memberships: NRA (life); AMA 840156; Tripoli Rocket Association 11843 L3 .........It rubs the lotion on it's skin or else it gets the hose again.........

07-22-2010, 07:32 PM	#5 (permalink)
seanh Registered Users Join Date: Feb 2007	don't know if this will work or not. http://cgi.ebay.com/Swashplate-Level...item3a5d2045ea if it's too large a hole then maybe get some aluminum tubing and make a bushing __________________ X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in