Couple of items

[jrman83]

The stock canopy is very hard to see, has anyone gotten any of the fusano or other brand one, and if so, any problems fitting 6s batts?

The battery rubber band battery straps are somewhat of a pain. They definitely work, but I have broken two now. I don't see any spot for a velcro strap. Are there other alternatives?

[learnedthehardway]

http://www.3drotorz.com/products/min...scheme-06.html

^^ Lynx wrap around canopies like this greatly improve visibility but like a lot of other Lynx products, can be hard to find. Sure they're made by Fusuno or Canomod for Lynx so you might be able to get them directly from them if you can't find any of the Lynx ones in stock where you don't have to pay high shipping costs. Think they're made by Fusuno, I'll check when I get home.

For the lipos I put Velcro on the tray and lipo and only use one of the o-ring straps on the upper part of the tray where the cutouts don't allow you to put velcro.

Odd that they're breaking unless you're using the ones meant for strapping the esc or they're dried out and brittle. The larger o-rings go around the Gens Ace 1200mah and Pulse 1350mah I use with ease. Sure rubber bands could work as a substitute

[Mikej]

I have a yellow Fusuno Assassin that is pretty visible - batteries fit fine (both 3S 2200 and 6S 1300(

[jrman83]

Thanks guys. Will look into those.

Sent from my SM-N910T3 using Tapatalk

[Aryemis]

You might have some issues finding a lynx canopy, they have been discontinued for a while now.
It is much bigger than stock though, much more visibility and space for lipos (you can fit 2x 3S 2200 in there !)

I use a single lipo strap through the ESC spot (around the ESC actually), along with sticky velcro.

It has held up fine for me.

[jrman83]

Thanks for the pic. Hadn't thought about going around the ESC.