540 maiden

[nick.m]

well had my maiden flight with my new sk540 equipped nc5 and im very pleased to say all went very well and im very pleased with it ,,flys soo much better than the beast x i used before,,had a bit of a tail wag with the gain set to 40 so raised to 50 which got rid of most of it apart from a small twitch but as the motor is extreemley rich and a bit lumpy at the moment im not too fussed about it ,,a bit of fine tuning when the motor is run and and this unit will be awesome,,georgie if you reading this i did have a problem with the gov and had to disable it,,the slightest move from tickover with the throttle stick would result in the gov kicking is straight away and quiet viciously causing the motor to die as its rich at the moment but with the throttle curve as i have it i thought it shouldnt kick in untill nearly half stick,,any ideas,,,
id also like to say a huge thankyou to georgie for all his help and anwsering the many questions i threw at him as with out him im sure my maiden wouldnt of gone so good,,THX DUDE YOUR A REAL STAR

[georgi UK]

=] Nick you are a born 540 user! great news! the SK gov needs to see a 0,20,40,40,40 th curve, drop the low ramp if too aggressive? georgi.

[nick.m]

thats exactly how i have my throttle curve dude
0,20,40,40,40
flat line at 60 iu1
flat line 100 iu2
ok so i have a 7 point curve so i take it its 0,20, 40,40,40,40,40,

[georgi UK]

=] ok, so drop the low ramp in the drive system and / or gov gain?

[nick.m]

ok think i may have found the culprip,,as my engine is rich as hell it was having a job idleing so i had to up the throttles trim to max to get a decent tickover now what i didnt know is that its also upped my throttle curve and maybe causing the gov to come in early

[georgi UK]

=] that would screw it up!