Register Now

SoftwareDrone · 02-15-2008, 11:17 AM

I recieved the Duralite Helicopter Package 'C' yesterday, but can't seem to find enough information in the instructions.
Hooking up the regulator to the battery and the switch is a no-brainer; the Deans plugs only go one way. There are two connectors coming off of the regulator, one of which the directions say goes to the reciever (I'm assuming "power in" although the instructions do not specify). Where does the other connector go? And which one of the two connectors has the lower voltage for the tail? Also, I have heard that I can charge the battery (2S2P, 3000 mAh Li-Mag) with a Triton 2 charger, but how?
Thanks
:-)

SoftwareDrone · 02-15-2008, 12:32 PM

Called Duralite tech support, very helpful folks! Got all the info I needed.
:-)

02-15-2008, 11:17 AM	#1 (permalink)
SoftwareDrone Registered Users Join Date: Dec 2007	Duralite package arrived, now what? I recieved the Duralite Helicopter Package 'C' yesterday, but can't seem to find enough information in the instructions. Hooking up the regulator to the battery and the switch is a no-brainer; the Deans plugs only go one way. There are two connectors coming off of the regulator, one of which the directions say goes to the reciever (I'm assuming "power in" although the instructions do not specify). Where does the other connector go? And which one of the two connectors has the lower voltage for the tail? Also, I have heard that I can charge the battery (2S2P, 3000 mAh Li-Mag) with a Triton 2 charger, but how? Thanks :-)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-15-2008, 12:32 PM	#2 (permalink)
SoftwareDrone Registered Users Thread Starter Join Date: Dec 2007	Called Duralite tech support, very helpful folks! Got all the info I needed. :-)

Register Now

Log-in