devo 12 s setup problem

[chrmchris]

Dear sirs,i have bouht recently your sukhoi su 35,and also i have the devo 12s remote control but unfortunately i cant setup the controller with my plane.I would be glad if you can send me a schedule on how to program my sukhoi su 35 with my devo 12s because here in Cyprus were i live nobody is able to do it,i have searched in internet and i cant find anything.I have found in internet some settings but for Jr transmitter but its completely different,i dont know the right settings for this plane!!!
So my last hope is you,nobody can know better from you.I just need a guide in order to program my devo 12s in order to fly my plane that is really amazing.Please send me instructions because im really desperate.Also i would like to say that when im connecting all servos to receiver doesn't work or responding why?only throttle servo respond why?
I have my plane sitting there without can do anything,nobody knows here where i live nobody is answering me in the internet so i have decide to ask you from where i bought the plane and of course you are expert on this matter.
Awaiting your soonest positive feedback so i can finally give life to my amazing plane bought from you.
The link of devo 12s:
http://www.rcgroups.com/forums/showthread.php?t=1606536

[SQRT(-2)]

Go to the Walkera sub forum, someone there has that radio I bet. If it is anything like the other Walkera radios it has a plane mode and everything should work just fine.

[chrmchris]

Dear friend already did that and they told me that they don't know this plane and can't help me,and advice me to read the manual of devoted,I did but if you don't know the right settings of the plane you can t do it.also contacted many times the manufacture of the plane without an answer.I'm really desperate.

[chrmchris]

Originally Posted by SQRT(-2)

Go to the Walkera sub forum, someone there has that radio I bet. If it is anything like the other Walkera radios it has a plane mode and everything should work just fine.

Dear friend already did that and told me that cannot help because they don't know my plane,also contacted many times manufacture of the plane freewing without any answer.

[chrmchris]

I did that and. they cannot help as they don't know my plane,also contacted many times manufacture of my plane freewing without answer

[SQRT(-2)]

Who makes this plane? Can you link to it? Is this a tiny BNF with a built in receiver or are you putting an Devo RX in it?

If you are putting a devo RX in it, it should not really matter what plane you are doing, you just plug the servos into the appropriate plug on the receiver.

[chrmchris]

I use an rx 1202 receicer part of my devo 12s,the manufacture is sz-freewing china,i plug all servos but nothing as also binding many times but nothing,yesterday i put throttle on maximum for some seconds and sound was not smooth,was doing small brakes not continuasly sound and suddenly throttle stoped.i switched off transmitter then on but throttle not working even if the led on receiver is solid and i cant hear any more the 3G sound when switch on the trx.

http://www.sz-freewing.com/

[SQRT(-2)]

That is odd, do you have an devo RX that you know works you can try, or try this RX in a model you know works?

[chrmchris]

I make servo test without EACH connected. And all servos working, but I hear a notice of the current in them without use them.my problem now is how to setup servos with my walker devoted 12s,I can't do it,I don't understand from the manual, only if someone who knows something more and guide me step by step,maybe you my friend as you look a person that has slot of knowledge regarding even modeling: -)

[chrmchris]

I make servo test without ESC connected.