Warp FPV v2.0

[02DropTopM3]

It's back!









For version 2.0 I took advantage of my old stock canopy that I had lying around and I mounted the Sony camera inside the nose:

http://www.ebay.com/itm/201037334316...84.m1497.l2649

The On-screen-display (OSD) board and GPS sensor are velcro'd to the outside of the canopy:

http://www.ebay.com/itm/2013-new-arr...-/140911716827

The video transmitter is velcro strapped to the side of the landing gear:

http://www.ebay.com/itm/291026753611...84.m1497.l2649

Video receiver and monitor are mounted to a tripod that sits next to me when I fly FPV.


I took it out tonight to test everything and it all worked flawlessly!

[MotorG525]

So if I order the pieces from those three links that all I would need? Besides the screen of course. I'm trying to do an fpv setup for my scale cobra and was gonna use the warp as a test bed

[02DropTopM3]

Originally Posted by MotorG525

So if I order the pieces from those three links that all I would need? Besides the screen of course. I'm trying to do an fpv setup for my scale cobra and was gonna use the warp as a test bed

I also upgraded the stock antenna with these:

http://www.readymaderc.com/store/ind...oducts_id=1539

There are even better antenna, but these work for the range that I fly. So, between those 4 links you should have everything other than the screen.

The OSD is optional as well, but it does give you some nice statistics while you're flying (current battery voltage, direction to home, distance flown, elevation, etc).

You will also need to build some cables from your battery to the camera / video-tx / OSD. Pretty simple stuff though. I can show you some details on how I wired everything up when you get to that point.