120HV + Gov. Mode 6

[jcflyer]

What is the modes primary use? Can I use this mode for flying 1100 - 2300 rpm's? What are the do's and don't with this mode?

[Vinger]

Use the exact mode on my Banshee and it allows me to run 1100-2200rpm on different flight modes. With mode 6 you will notice slightly reduced rpm from mode 4 but you can either up the pinion or run slightly higher TC's. Governor performance is the same as in mode 4.

Works really well for a large spread in head speed rpms.

[jcflyer]

Originally Posted by Vinger

Use the exact mode on my Banshee and it allows me to run 1100-2200rpm on different flight modes. With mode 6 you will notice slightly reduced rpm from mode 4 but you can either up the pinion or run slightly higher TC's. Governor performance is the same as in mode 4.

Works really well for a large spread in head speed rpms.

Vinger thanks for the reply that is exactly what I was looking for, I am using mode 4 on my Banshee and have between 1890-2300 rpm's for hs. I would like to get a much lower hs in normal mode like maybe 1500 or so. Isn't there an rpm range to stay away from with the Banshee because of some kind of vibes?

[f8fbc]

Jcflyer,

I have been using the Heli jive mode 6 on my E5. Currently have the throttle curves set to about 30/50/62%, and those values are giving me about 1300 / 1820 / 2150 rpms.

Seems to be working good so far. That's one of the reasons I went for the Heli jive so I can run low head speeds with out a lot of set up changing.

I like it.

Lance

[jcflyer]

Ok brother thanks, I will be changing mine to mode 6 next time out....