Spektrum telemetry amps/rpm

[brokenheli666]

Ive just installed all my telemetry sensors , voltage, rpm ,temp and amps. my issue is the rpms and amps seem to read fine on the live stream, but my min/max screen is way off
ive set my ratio up to my exact specs.

im running gov at 1350 rpm , *live is spot on*.. min/max screen says max/6880

the amps . live stream seems ok but max is very high

so instead of my tigger being throttle at %5 i set it to an extra switch so i can turn it all on once i get into hover , i heard spool up can give funky numbers ... but no change ..

[aerocal]

You can set trigger for logging and voice announcements but the Min/Max is collecting from powerup.You cant really turn the telemetry itself On/Off with a switch. Try hitting the Clear button after spoolup and see if the Min/Max is more accurate at the end of the flight.

[brokenheli666]

ok cool..... thanks

[Jherison]

You can hit clear on the min/max screen once it's up to speed. This will reset the display. I do this all the time because the rpm will read erratically until the head is over 1000 rpm.