Are Logo 550 models different from my older 5003D

[Jamesppp]

Just wondering if my old FBL500 3d that I mostly fly with 560mm rotors is a lot different than the newer 550 models. Also, is the 1 model 500 still offered the same as mine or smaller like other 500 helis that generally use I think 425mm blades(I've never had one) or does the Logo 480 fill tha slot.
I'm out of touch on the Mikado helis but still have mine flying great


Thanks

[taosgraveyard]

The 500 is still 500 mm blades, and and basically has not changed much. Doesn't come with counterbearing, and the old style counterbearing is still available

The 550sx comes with the SX counterbearing ( which also has the third main shaft bearing)
And a new head So yes it's a bit different from your 500 3D swinging 560mm blades.

, I upgraded my 2010 5003D to be a 550SX. Doesn't fly much different...

[el guapo]

The 550sx has a longer tail boom,too. Gives it enough room for aggressive 3d with 550 mains with 95mms tail.

On my logo 500 I had to be carefully or I would tap the tails with the mains.