Register Now

FLMIBrewer74 · 12-06-2015, 10:49 AM

I'm running the X4 with a Hitec 30 amp Power Box and the box voltage is maxed at 17.5. I f I go any higher the charger starts displaying a error message on input voltage. I'm trying to balance charge 6 amps to a 6s 5000mah lipo. I do not drop my cells below 3.7-3.8v, so that's where the cell's voltages are at on the beginning of the charge. I'm only getting 2.2 amps out of it. Help Please Thanks.

STAZZ · 12-06-2015, 12:47 PM

Manual says the max charge power is 50W. Based on this, the charger will charge 3S/11.1v battery at about 4.5A max, while for 6S/22.2v battery the max will be like 2.2A.

P.S. Manual says also that input voltage should be 11 - 15v.

Slyster · 12-06-2015, 12:49 PM

https://www.helifreak.com/showthread.php?t=476431

Gregor99 · 12-06-2015, 03:05 PM

Quote:

Originally Posted by Slyster

https://www.helifreak.com/showthread.php?t=476431

+1. Within that thread review posts 5 and 8.

https://www.helifreak.com/showpost.p...33&postcount=5

https://www.helifreak.com/showpost.p...42&postcount=8

FLMIBrewer74 · 12-06-2015, 08:52 PM

Looks like I was grossly misinformed at LHS! I should have checked myself.

: arggg:

12-06-2015, 10:49 AM	#1 (permalink)
FLMIBrewer74 Registered Users Join Date: Jul 2014	CAN NOT GET 6 AMPS OUT X4 AC PLUS! I'm running the X4 with a Hitec 30 amp Power Box and the box voltage is maxed at 17.5. I f I go any higher the charger starts displaying a error message on input voltage. I'm trying to balance charge 6 amps to a 6s 5000mah lipo. I do not drop my cells below 3.7-3.8v, so that's where the cell's voltages are at on the beginning of the charge. I'm only getting 2.2 amps out of it. Help Please Thanks. __________________ Nano QX 3D, 41" Edge 540, Plasma 2, Orion, Widowmaker, Timber, J-3 Cub Clip Wing 250,TH Mini Edge 540, Recoil 26 DX9, DX6, Soko Heli Tool

12-06-2015, 12:49 PM	#3 (permalink)
Slyster Registered Users My HF Map location Join Date: May 2008	https://www.helifreak.com/showthread.php?t=476431 __________________ "It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles

12-06-2015, 08:52 PM	#5 (permalink)
FLMIBrewer74 Registered Users Thread Starter Join Date: Jul 2014	Looks like I was grossly misinformed at LHS! I should have checked myself.: arggg: __________________ Nano QX 3D, 41" Edge 540, Plasma 2, Orion, Widowmaker, Timber, J-3 Cub Clip Wing 250,TH Mini Edge 540, Recoil 26 DX9, DX6, Soko Heli Tool

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-06-2015, 12:47 PM	#2 (permalink)
STAZZ Registered Users Join Date: Jul 2011 Location: Tallinn, Estonia	Manual says the max charge power is 50W. Based on this, the charger will charge 3S/11.1v battery at about 4.5A max, while for 6S/22.2v battery the max will be like 2.2A. P.S. Manual says also that input voltage should be 11 - 15v.

Register Now

Log-in