Register Now

breathe rc · 07-28-2012, 02:24 AM

Ok so I did something stupid. I accidentally plugged one of my 6S packs into my GVR 7020. Of course my mistake was realized when the unit started smoking. I immediately disconnected, and inspected the unit. I found that one of the 16V chips burned up. I can see some of the info on the unburned chip, but not all. Can someone tell me what kind of chip this is? Any help would be greatly appreciated. Thanks

Click image for larger version

Name: ImageUploadedByTapatalk1343460211.803819.jpg
Views: 175
Size: 78.3 KB
ID: 335908

Click image for larger version

Name: ImageUploadedByTapatalk1343460237.893592.jpg
Views: 152
Size: 41.4 KB
ID: 335909

Sent from my iPhone 4S
using Tapatalk

Fabien · 07-28-2012, 12:58 PM

Hi,

both are same components ( C1, C2). But if you have plugged a 6S pack, the copper layers in the PCB ( the ones in the " sandwich" might be badly damaged / burned and so does the copper layer going on one of the FET on the other side of the Unit.

Please send me by PM your details and the shop from which you bought the unit and we will check what we can do

Best regards,

Fabien

breathe rc · 07-28-2012, 06:24 PM

Thanks for the speedy reply Fabien. I have PMed you with all the details.

Sent from my iPhone 4S
using Tapatalk

07-28-2012, 02:24 AM	#1 (permalink)
breathe rc Registered Users Join Date: May 2011	Burned up my GVR-7020 Ok so I did something stupid. I accidentally plugged one of my 6S packs into my GVR 7020. Of course my mistake was realized when the unit started smoking. I immediately disconnected, and inspected the unit. I found that one of the 16V chips burned up. I can see some of the info on the unburned chip, but not all. Can someone tell me what kind of chip this is? Any help would be greatly appreciated. Thanks Sent from my iPhone 4S using Tapatalk __________________ If there's better, I want it. HDCell 500, Scorpion HKIII 4025-890, Compass 6HVU, Scorpion HKII-4225LE, 9K4O

07-28-2012, 06:24 PM	#3 (permalink)
breathe rc Registered Users Thread Starter Join Date: May 2011	Thanks for the speedy reply Fabien. I have PMed you with all the details. Sent from my iPhone 4S using Tapatalk __________________ If there's better, I want it. HDCell 500, Scorpion HKIII 4025-890, Compass 6HVU, Scorpion HKII-4225LE, 9K4O

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2012, 12:58 PM	#2 (permalink)
Fabien Registered Users Join Date: Feb 2006	Hi, both are same components ( C1, C2). But if you have plugged a 6S pack, the copper layers in the PCB ( the ones in the " sandwich" might be badly damaged / burned and so does the copper layer going on one of the FET on the other side of the Unit. Please send me by PM your details and the shop from which you bought the unit and we will check what we can do Best regards, Fabien

Register Now

Log-in