Register Now

Flyby2.4 · 12-21-2012, 08:09 PM

Just wondering what pitch you guys are running on your main blades. I have 12 deg. Plus and minus according to my align digital pitch gauge.thinking about 13 or 14. Wondering how high you use and if it has conflicts with swash, motor load, or frame flex . I have astroid frame braces and about 50 flights on my bird with no issues thus far. Looking for a little input on everyone else's thoughts. Thanks and happy flying

Chris Gardill · 12-21-2012, 10:48 PM

I run the Edge 255 main blades, frame braces and then the Wicked Motor with +/- 13.5 degrees with no issues. Really happy with my current setup on this heli.

Sent from my iPad using Tapatalk HD

65L88 · 12-22-2012, 10:18 AM

I'm running the same combo as Chris except I'm spinning Gaui blades. Works well for me.

Flyby2.4 · 12-22-2012, 10:24 AM

I forgot to mention I have blade cf blades and everything else is stock besides locktite on motor bearings because after second flight shaft in motor was already starting to get chewed up . Ok for know. Going to experiment with 13 and 14 deg. Pitch today if weather permits. Put my findings and experiences here when I do. Thanks for inputs guys

12-21-2012, 08:09 PM	#1 (permalink)
Flyby2.4 Registered Users Join Date: Dec 2012	Blade 300x pitch Just wondering what pitch you guys are running on your main blades. I have 12 deg. Plus and minus according to my align digital pitch gauge.thinking about 13 or 14. Wondering how high you use and if it has conflicts with swash, motor load, or frame flex . I have astroid frame braces and about 50 flights on my bird with no issues thus far. Looking for a little input on everyone else's thoughts. Thanks and happy flying

12-21-2012, 10:48 PM	#2 (permalink)
Chris Gardill Registered Users Join Date: Feb 2012	I run the Edge 255 main blades, frame braces and then the Wicked Motor with +/- 13.5 degrees with no issues. Really happy with my current setup on this heli. Sent from my iPad using Tapatalk HD __________________ Synergy E7SE (KDE 700XF-495); Synergy E5 (KDE 600XF-530); Goblin 500 (XNova 4020-1200).

12-22-2012, 10:18 AM	#3 (permalink)
65L88 Registered Users My HF Map location Join Date: Mar 2010	I'm running the same combo as Chris except I'm spinning Gaui blades. Works well for me. __________________ MARTY **Team Newb pilot Trex 500 fbl -Tarot 450 Pro fbl- 300X - 130X X3- mCPX brushless X3-Nano cPX X 2- Nano QX**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-22-2012, 10:24 AM	#4 (permalink)
Flyby2.4 Registered Users Thread Starter Join Date: Dec 2012	I forgot to mention I have blade cf blades and everything else is stock besides locktite on motor bearings because after second flight shaft in motor was already starting to get chewed up . Ok for know. Going to experiment with 13 and 14 deg. Pitch today if weather permits. Put my findings and experiences here when I do. Thanks for inputs guys

Register Now

Log-in