ITCHY FINGERS!!!!!!!!!!

[helihathnofury]

Am looking fwd to putting the motor on too. Have ordered a Hobbywings 40A ESC, and those carbon blades look nice and stiff. Microheli MG is well made; should be a good and hopefully enduring upgrade, and easy to change.

Mike

[Heli Yea!]

It is all of the above! Mine is still going strong! (a great buy) I also want to try those carbon blades and a pair of woodies and run some tests!

[copterboy]

Hi Mike, sounds like you have a nice box of bling there, can't wait to hear about the MH MG.

Do you have copterx head? You may need 4 shims (1mm each) to go with the Align blade's? Revolution models sells them in UK. I used the washers from e-sky thrust bearing's - their is a pic of the Align 325mm blades installed on e-sky head in my album.

[helihathnofury]

Yes, I got the CopterX head - great it is too. Had it for 4 months and with the Trex B swash and Align carbon shaft, makes a good setup for the main rotors.

Mike

[helihathnofury]

I am absolutely itching to open the presssssssie with my 4G3 in it. Maybe it's good that i will be away from Mon day until Christmas morning!!!!!!!!!!!!

[Ian 777]

They do look lovely little things. I just ordered the PicoZ dogfighting set for my youngest son they look such fun.

[helihathnofury]

Of course it is for your son Ian !!!!!!!!!! I believe you. Just like me wanting a T-Rex 500 so that my son can have the 450 !!!!!!!!!!!!!!!

Mike

[Ian 777]

No straight up I wont even touch it...... except of course that you need 2 to dogfight

[MTboy]

Crap!! No one told me I will need shims for the align blades with the head
Where can I find these? Need to get them quick, my stuff should be here in 14 days...

[Heli Yea!]

You only need shims for the stock head using Align blades. The CopX head works great with Align blades and no mods are needed. If you are having problems fitting them just tighten the blade grips more!

[Heli Yea!]

OOOOOOOOHHHHHHH MMMMMMMMAN are my fingers getting itchy! The New MG90's are installed!!!!!! I've got for the first time ever a by the book perfect setup using the Stock Tx!!!!!!!!!!!!! Not the usual as perfect as the stock Tx gets setup! (which is perfect, in its own way) My new HDX 3550 motor which has not yet seen the out of doors!!!!!!!!!!! The sun is shining and bright!!!!!!!!!!!!! But it's freezing balls outside 9*F!!!!
By the time I walk the mile to the park my hands will be numb and electronics too cold to operate! Guess I'll be flying in in the living room again today for a small scratching!

[helihathnofury]

I keep looking at the package under the Christmas tree...................only 4 days to...............

[Heli Yea!]

Man I really want a 4G3 but it's not in the budget now. I can't imagine how you must feel
knowing it's right there! You can hold it and shake it(don't shake it) but can't see it or fly it anticipation growing as Christmas gets closer! You just hold on to your last bit of sanity as one hand is uncontrollably pulling to rip the paper off of it as if by magnetic force! All you can do to stop yourself is to put up a plexi-glass barrier around the tree as you scratch on it like a dog wanting to come inside. So then you leave the house and find 10+ excuses why you need to go back! As you arrive you sit and stare blankly at it from a distance untill slumber succumbs you!

[psilo]

I'm hoping to have my 600N by XMas He is posting it tomorrow, just hope it arrives for a Xmas flight.

Just about to replace the main motor on my 4#3B as it is very erratic, then at least I can annoy the cat and chase it round the house

[helihathnofury]

There you are Gerd, your wishes have been answered - someone's smiling on the you!!! Less than 24hours before I can get to play with the 4G3 - Christmas tree, tinsel, lights, decorations, and cat beware!!!!!!!!!!!!

Mike

[MTboy]

So close I can smell the DX6i
Hope everyone is having an easier time then me waiting to open gifts

[Grant_beltcp]

I'm still wrapping