Register Now

copterboy · 06-04-2013, 05:20 PM

Hey sandol, this has been puzzling me? I think I'm still getting lost in translation, so I ask for clarification for my own peace of mind

Does that mean you have found a compatible TX?

I was thinking could you get an eflight 3-1 esc/gyro/rx and then get a spektrum Tx (eg dx6i) to fly it with?

At least if the heli does not work, your still left with a tx that you can use on the next project?

Sandol · 06-09-2013, 07:30 PM

Copterboy:

Yes, that tx is compatible. However, binding went unsuccesfull, ofcourse... xD

The webshop has offered some kind of compensation for the copter, after some "figthing", finally, i guess.

Binding process seemed very easy, but it looks like the rx is in bad condition. the few times it binds, one servo is acting funny. When i disconnect main motor, all servos works fine. After trying to bind like for 2 hours, it might binded 5 times. Funny enough, every time i turn of the copter, it is not binded when i turn it on again. Hopefully, i can get a replacemnt copter, that works. TX could be faulty, but for some reason i don't think so...

Reason why i think tx is compatible: It is they same depicted in the user manual, + several webshops says it is compatible.

06-04-2013, 05:20 PM	#21 (permalink)
copterboy Registered Users Join Date: May 2008	Hey sandol, this has been puzzling me? I think I'm still getting lost in translation, so I ask for clarification for my own peace of mind Does that mean you have found a compatible TX? I was thinking could you get an eflight 3-1 esc/gyro/rx and then get a spektrum Tx (eg dx6i) to fly it with? At least if the heli does not work, your still left with a tx that you can use on the next project? __________________ COPTERBOY DX6i, mSR (SOLD), BeltCP (SOLD), mCPx w solid boom and Rakon Heli Head T-Rex450V2 w.PRO head, Scorp-8 & 45A V2 ESC, CSM4200/S9257, 3xHS65MG E-Flite CX2 - All Microheli/Extreme CNC CF Upgrades TRex600N, Kasama Head, OS50SX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2013, 07:30 PM	#22 (permalink)
Sandol Registered Users Thread Starter Join Date: May 2013	Copterboy: Yes, that tx is compatible. However, binding went unsuccesfull, ofcourse... xD The webshop has offered some kind of compensation for the copter, after some "figthing", finally, i guess. Binding process seemed very easy, but it looks like the rx is in bad condition. the few times it binds, one servo is acting funny. When i disconnect main motor, all servos works fine. After trying to bind like for 2 hours, it might binded 5 times. Funny enough, every time i turn of the copter, it is not binded when i turn it on again. Hopefully, i can get a replacemnt copter, that works. TX could be faulty, but for some reason i don't think so... Reason why i think tx is compatible: It is they same depicted in the user manual, + several webshops says it is compatible.

Register Now

Log-in