14SG and 401/9254

[MattJenner]

Hi All,
I cannot get the gyro to initialise, I get the red light slowly flashing.
When I go into gyro I see Rudd Gyro , gyro 2 Ael gyro 3 Elev.

I have inh gyro 2 and 3

I don't understand how to get it to work on Rud, this os what I have

GYRO (RUD) NORMAL
COND NORMAL ON
TYPE GY AVCS

RATE 80% <80%>


FINE TUNINING
-- +0% < +0%


Is there something I am missing.

I have all the plugs in right channel on rx, it is doing my head in..

I know it is not the gyro as I plugged it into a another rx using a 10c and it worked fine.

It was so simple on the 10C

ha ha
Any step by steep help would be appreciated.

Many thanks

Matt

[HilliHeli]

Sent PM with some settings-info,

Try those and report-back

[MattJenner]

Thanks HillieHelli

It seems my gyro is faulty, (401) it still would not initialise after following your settings,
so I tried an old 401 and it worked fine, I even setup a switch so I could flick between AVCS and Normal, it worked fine.

So I put the troubled 401 back and hey ho all I got was the slow flashing red light..

But what is strange is when I plug the trouble 401 into my other machne using a 10C or a 12FG it works, it will not work with my 14SG.

SO I guess there something wrong..

Matt

[HilliHeli]

It has been quite some time since I have actually activated a GY-401 and programmed a TX. to operate it.
I do still have a Spartan ds760 on my Flybar'd T-Rex 250 so that helps me stay somewhat on-track to these type Gyro's.

Very-strange that it will work with the 10C or 12FG and not with your new T14SG (?) but glad that you were able-to get the second one working properly.

Possibly there is a solution that I'm not seeing or you can send the suspected GY-401 to Robbe (UK) for inspection.