START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
X400 and MX400 Ark X400 and HeliMax MX400 Helicopters Information |
|
LinkBack | Thread Tools | Display Modes |
04-01-2007, 09:35 PM | #1 (permalink) |
Registered Users
|
gorilla gears on a mx400 is it possible ???
i crashed my mx400 today and was wondering if i could use gorilla gears on it and if so if you guys that have done it have pics for me to work from ! and another question to add to this is what parts from trex 450 will work on the mx400 ??? i think i am going to need a feathering shaft main shaft and flybar
__________________
Trex 600NP Trex500esp |
Sponsored Links | |||
Advertisement |
|
04-02-2007, 10:07 AM | #2 (permalink) |
Registered Users
Join Date: Jan 2007
|
Yes Gorilla gear will fit with modification to your existing gear. If your mount tabs on the stock gear are still intact just cut off the bows at the outboard end of the flat portion, align the Gorilla gear, drill holes in the stock gear through the existing holes in the Gorilla gear, and secure it with 2 screws. I managed to break the mount tabs off of the stock gear and had to make adapters out of nylon.
Alternate method is Zip ties, not as clean but it works just fine. To refit your head these parts work well, HS1070 Main Rotor Holder(XL), HS1003 Feathering Shaft AGNH1115, HS1184 Flybar Rod/220mm, HS1191 Flybar Paddle AGNH1120 these are 6.11G paddles and will liven up your cyclic response, Here are the heavy paddles which will retain the more stable cyclic HS1192 Flybar Paddle AGNH1120 Align main shafts fit but are slightly smaller in diameter which shows up in the metal MX400 center mast as very slight rocking on the shaft. |
Thread Tools | |
Display Modes | |
|
|