spartan quark connector

[salrica]

I'm looking to get the female connector that holds the servo.
Any ideas?

Please move this thread if this is not the right place

Thanks in advance!

Rick

[LubeMan1]

To connect what?

[Xrayted]

Originally Posted by salrica

I'm looking to get the female connector that holds the servo.
Any ideas?

Please move this thread if this is not the right place

Thanks in advance!

Rick

Are you talking about the plug on the gyro that the plug from the rudder servo goes into? If so, its just a standard servo plug which can be found at any hobby shop or online. http://www.helidirect.com/unassemble...tor-p-5380.hdx

[salrica]

Originally Posted by Xrayted

Are you talking about the plug on the gyro that the plug from the rudder servo goes into? If so, its just a standard servo plug which can be found at any hobby shop or online. http://www.helidirect.com/unassemble...tor-p-5380.hdx

That's the one.
Where the tail servo plugs in

[LubeMan1]

Didn't your quark come with the proper connector for the servo connection already??

[salrica]

Originally Posted by LubeMan1

Didn't your quark come with the proper connector for the servo connection already??

Yes, it came with it.
But when I tried to pull out the servo I was holding the wires instead of the connector and the Green wire came loose, I broke it from the wire holder and came loose.
I solder it back but I don't like how it looks and don't know how to pull it out with out breaking the "black case".
Any ideas?
I'm looking at this ones from eBay
Are this the ones?http://www.ebay.com/itm/321253352789
I need also the servo connectors that's why I want the pairs

[LubeMan1]

You should be able to remove the wire from the case by gently prying up on the little plastic tab that locks the wire into the case...I just take my exacto knife and get it under the little tab then just pull the wire from the connecter housing you should be able to do it that way also.

[LubeMan1]

Did you ever get this resolved??