Register Now

Surfrjeff · 03-12-2009, 01:45 PM

Will this tail servo work better than stock, it got the same specs as the 3500G, and what do i have to change on the gyro to get it to work properly.

Thanks, Jeff

gravydrive · 03-12-2009, 07:23 PM

The 83 only works with the HG-5000, Hitec's gyro. It wil also run on high end gyros like the Spartan, GY-611 and the new GY-520. You can run the 5084MG on all gyros.

helidude3 · 03-12-2009, 07:38 PM

what about the GP 750?

stock · 03-12-2009, 08:00 PM

I have try once to put the 5083 on gp750, seems not working and the servo only turns very slowly.

Surfrjeff · 03-12-2009, 09:22 PM

Ya i just tried it and its a no go, ill try the 5084 when i get a chance, but is the 3500G worth getting, the 5084 has the smae torque and speed but like 30$ cheaper.

03-12-2009, 01:45 PM	#1 (permalink)
Surfrjeff Registered Users Join Date: Aug 2007	Hitec HSG-5083 Will this tail servo work better than stock, it got the same specs as the 3500G, and what do i have to change on the gyro to get it to work properly. Thanks, Jeff

03-12-2009, 07:38 PM	#3 (permalink)
helidude3 Registered Users My HF Map location Join Date: Jan 2009	what about the GP 750? __________________ T-rex 250 Super Combo w/ hs-65mg's Blade cp pro: spectrum receiver, BL main, DD tail, Gyro www.bladecpupgrades.co.nr Blade cx2 E-flite 4-site

03-12-2009, 08:00 PM	#4 (permalink)
stock Registered Users Join Date: Jun 2006	I have try once to put the 5083 on gp750, seems not working and the servo only turns very slowly. __________________ heli junkies

03-12-2009, 09:22 PM	#5 (permalink)
Surfrjeff Registered Users Thread Starter Join Date: Aug 2007	HSG-5083 Ya i just tried it and its a no go, ill try the 5084 when i get a chance, but is the 3500G worth getting, the 5084 has the smae torque and speed but like 30$ cheaper.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-12-2009, 07:23 PM	#2 (permalink)
gravydrive Registered Users My HF Map location Join Date: Nov 2007	The 83 only works with the HG-5000, Hitec's gyro. It wil also run on high end gyros like the Spartan, GY-611 and the new GY-520. You can run the 5084MG on all gyros.

Register Now

Log-in