Register Now

anthony1 · 04-24-2015, 06:50 AM

is ele.comp the same as ff that nick Maxwell uses in his video to tune the nose staying level in pitch pumps?
Anthony

brianapp · 04-26-2015, 09:45 PM

That is how I read it.

This parameter sets the F/F (feed forward) mixing amount. There are 10 choices with in-
creasing volume of mixing. The value selected automatically sets the F/F mixing volume for
PIT
ELE. Correct mixing directions are previously determined by the AIL and ELE STK.
Dir menus. When the F/F mixing value is 0, no mixing occurs. Adjust the ELE.Comp until
the model climbs and descends with aggressive collective input without lifting or dropping
its nose. Please avoid excessive amounts of ELE.Comp because it will adversely affect the
model in other aspects of flight such as rolls

Kind of a boom drag pre comp.

anthony1 · 04-27-2015, 10:55 AM

ok I have been trying that parameter and it goes from 0-100% so guess they made it more fine tunable, seems like 50% is the same as 5 in previous firmware releases, which is a good thing , dr ben has been helping me with this problem and I had it set to 5% which now I know is next to nothing and finally I am getting somewhere with the tuning, actually I am quite enjoying the fact that I can tune at the field with nothing more than the little poker, bank switching would be nice though!
thanks for the help
Anthony

04-24-2015, 06:50 AM	#1 (permalink)
anthony1 Registered Users My HF Map location Join Date: Nov 2010 Location: Coral Springs , Florida	more simple question is ele.comp the same as ff that nick Maxwell uses in his video to tune the nose staying level in pitch pumps? Anthony __________________ Anthony raw 500, xl power nimbus 550,Tron 5.8 heritage, Tron Dnamic, cgy760-r, futaba

04-27-2015, 10:55 AM	#3 (permalink)
anthony1 Registered Users Thread Starter My HF Map location Join Date: Nov 2010 Location: Coral Springs , Florida	ok I have been trying that parameter and it goes from 0-100% so guess they made it more fine tunable, seems like 50% is the same as 5 in previous firmware releases, which is a good thing , dr ben has been helping me with this problem and I had it set to 5% which now I know is next to nothing and finally I am getting somewhere with the tuning, actually I am quite enjoying the fact that I can tune at the field with nothing more than the little poker, bank switching would be nice though! thanks for the help Anthony __________________ Anthony raw 500, xl power nimbus 550,Tron 5.8 heritage, Tron Dnamic, cgy760-r, futaba

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-26-2015, 09:45 PM	#2 (permalink)
brianapp Registered Users Join Date: Oct 2009	That is how I read it. This parameter sets the F/F (feed forward) mixing amount. There are 10 choices with in- creasing volume of mixing. The value selected automatically sets the F/F mixing volume for PIT ELE. Correct mixing directions are previously determined by the AIL and ELE STK. Dir menus. When the F/F mixing value is 0, no mixing occurs. Adjust the ELE.Comp until the model climbs and descends with aggressive collective input without lifting or dropping its nose. Please avoid excessive amounts of ELE.Comp because it will adversely affect the model in other aspects of flight such as rolls Kind of a boom drag pre comp.

Register Now

Log-in