Register Now

bj660raptor · 02-25-2012, 07:59 AM

Hi I was wondering during programming can you choose 2 parameters for the start up speed? for instance can i choose heli middle and then plane fast,would that then be the start up speed then throttle response? thanks, as of right now i just have heli middle so i wanted to see if i can get better throttle response than I have now?

snemi00 · 02-26-2012, 07:10 AM

You can only have one throttle response selected. With the vbar governor we have two throttle responses like you are talking about.
I am assuming the reason you asked this question is because the throttle feels weak in flight and the headspeed recovers slowly. You must be running a throttle curve on your radio and not using the YGE governor function.
You may be used to running a Castle esc with a flat throttle curve or similar. The YGE is really meant to be used in governor mode and has an amazing quality governor built in. The governor will control your headspeed solidly and this is why there is no need for throttle response programming.

bj660raptor · 02-26-2012, 09:36 AM

k its on my logo and yes flat curves, i am running a 70% curve idle1,and a 85% curve in 2, when i tried to set the gov on when i hit idle2 i thought the head was going to explode and the esc came down beeping,can you give me some starting points with the yge gov programming,be as in depth as you can,ireally wanna get this right and thanks for your help.

bj660raptor · 02-26-2012, 08:54 PM

k so i went to electrorc and there is a programming article and i programmed it and it seems like it works in idle 1 and normal flight but when i go to idle2 the headspeed goes 100% even with an 80% flat curve. When i program it i use normal mode to program it i have a linear throttle curve 0 to 100 so should i program it with idle2 and throttle hold?

snemi00 · 02-27-2012, 12:07 PM

Make sure you set the stop(low throttle) and full speed (100% throttle) with the program card and the esc beeps when you do it. A linear 0-100% curve is fine to setup with.

bj660raptor · 02-27-2012, 02:09 PM

yeah the throttle is linear in stop and full setup seems like the gov in norm and idle one but switching to idle 2 i dont get that smooth next gear transition it just slams into idle 2 with a ridiculous headspeed,whats going on with that?

bj660raptor · 02-27-2012, 10:15 PM

ahhh to hell with it,im gonna go vbar gov

02-25-2012, 07:59 AM	#1 (permalink)
bj660raptor Registered Users Join Date: Apr 2010	a programming option? Hi I was wondering during programming can you choose 2 parameters for the start up speed? for instance can i choose heli middle and then plane fast,would that then be the start up speed then throttle response? thanks, as of right now i just have heli middle so i wanted to see if i can get better throttle response than I have now? __________________ 600 DFC HV Pilot Brandon J.

02-26-2012, 07:10 AM	#2 (permalink)
snemi00 Registered Users Join Date: Jan 2010	You can only have one throttle response selected. With the vbar governor we have two throttle responses like you are talking about. I am assuming the reason you asked this question is because the throttle feels weak in flight and the headspeed recovers slowly. You must be running a throttle curve on your radio and not using the YGE governor function. You may be used to running a Castle esc with a flat throttle curve or similar. The YGE is really meant to be used in governor mode and has an amazing quality governor built in. The governor will control your headspeed solidly and this is why there is no need for throttle response programming. __________________ SAB Heli Division Rotorquest

02-26-2012, 09:36 AM	#3 (permalink)
bj660raptor Registered Users Thread Starter Join Date: Apr 2010	k its on my logo and yes flat curves, i am running a 70% curve idle1,and a 85% curve in 2, when i tried to set the gov on when i hit idle2 i thought the head was going to explode and the esc came down beeping,can you give me some starting points with the yge gov programming,be as in depth as you can,ireally wanna get this right and thanks for your help. __________________ 600 DFC HV Pilot Brandon J.

02-26-2012, 08:54 PM	#4 (permalink)
bj660raptor Registered Users Thread Starter Join Date: Apr 2010	k so i went to electrorc and there is a programming article and i programmed it and it seems like it works in idle 1 and normal flight but when i go to idle2 the headspeed goes 100% even with an 80% flat curve. When i program it i use normal mode to program it i have a linear throttle curve 0 to 100 so should i program it with idle2 and throttle hold? __________________ 600 DFC HV Pilot Brandon J.

02-27-2012, 12:07 PM	#5 (permalink)
snemi00 Registered Users Join Date: Jan 2010	Make sure you set the stop(low throttle) and full speed (100% throttle) with the program card and the esc beeps when you do it. A linear 0-100% curve is fine to setup with. __________________ SAB Heli Division Rotorquest

02-27-2012, 02:09 PM	#6 (permalink)
bj660raptor Registered Users Thread Starter Join Date: Apr 2010	yeah the throttle is linear in stop and full setup seems like the gov in norm and idle one but switching to idle 2 i dont get that smooth next gear transition it just slams into idle 2 with a ridiculous headspeed,whats going on with that? __________________ 600 DFC HV Pilot Brandon J.

02-27-2012, 10:15 PM	#7 (permalink)
bj660raptor Registered Users Thread Starter Join Date: Apr 2010	ahhh to hell with it,im gonna go vbar gov __________________ 600 DFC HV Pilot Brandon J.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in