Post your Protos Videos here

[mic-21]

Originally Posted by rikef16

2600 is fine, but you can tam it down a lil bit just to have a feel for it, i personally run 2300 on normal mode when i want to fly smoother. I also have one voltz 2650, just make sure you mount it as foward as you can to have proper Cg, since flybarless is very sensitive to that. On my beastx i have control beavior set to transmitter, pitching up and tail to medium, stick deadband set to 1, tail precomp off, cyclic response high and pitch boost off. On my transmitter i have both aileron and elevator set to 5% expo and tail to 15%. Travel adjust is 115 to ail and elev and 100 to tail.

I have to add 75g of metal where the Lipo is to get balance . i have control behavior set to transmitter too , and just test 15% expo to ELe , Ail, and Tail . will bring it down next time ,, about Cyclic Response I only try Slightly Increased ( Red Flashing ) for sure need to crank up a not or 2 . try to tune the Tail before move to Cyclic ...did you happy with how the Tail perform ...No oscillation in fast backward flight ? or Bounce back ? fast forward Piro consistent ??
just wonder what is your Gyro Gain % is ?? my is at 72% in my DX7 . and still testing
John

[rikef16]

Originally Posted by mic-21

I have to add 75g of metal where the Lipo is to get balance . i have control behavior set to transmitter too , and just test 15% expo to ELe , Ail, and Tail . will bring it down next time ,, about Cyclic Response I only try Slightly Increased ( Red Flashing ) for sure need to crank up a not or 2 . try to tune the Tail before move to Cyclic ...did you happy with how the Tail perform ...No oscillation in fast backward flight ? or Bounce back ? fast forward Piro consistent ??
just wonder what is your Gyro Gain % is ?? my is at 72% in my DX7 . and still testing
John

I didnt add weight on mine since i only got one 2600. I was really happy with the tail authority! I tried with stock blades, after I bought metal tail grips so i could use 5mm tail blades and i used edge 72mm tail blades, also have 3k msh tail blades, all perform very well! Bear in mind you also need a good tail servo, i have MKS DS760 wich is an awesome servo! Never had a blowout or bounces. On my dx7s i have 50% on normal mode and 48 on stunt.

[mic-21]

Originally Posted by rikef16

I didnt add weight on mine since i only got one 2600. I was really happy with the tail authority! I tried with stock blades, after I bought metal tail grips so i could use 5mm tail blades and i used edge 72mm tail blades, also have 3k msh tail blades, all perform very well! Bear in mind you also need a good tail servo, i have MKS DS760 wich is an awesome servo! Never had a blowout or bounces. On my dx7s i have 50% on normal mode and 48 on stunt.

Futaba BLS 251 is my Tail Servo ,,and I am using KBDD 70mm ..I don't know about the DX7s but seem like you are using Gyro Sense ,,,not end point ( gear channel ) so 50% is F or G in BeastX Gyro Menu ??

[rikef16]

Gyro gain on dx7s is different from dx7's. Mine is at G on beastx gyro menu.

[mic-21]

Originally Posted by rikef16

Gyro gain on dx7s is different from dx7's. Mine is at G on beastx gyro menu.

thanks

[rikef16]

Originally Posted by mic-21

thanks

Anytime

[mic-21]

Originally Posted by rikef16

Anytime

it seem like the BeastX is fly good out of the box . you only change the Cyclic Response & Control Behavior to suit your Fling style

[rikef16]

That's the beauty of beastx, great performance out of the box, very little or no tunning at all and is good to go!

[mic-21]

Originally Posted by rikef16

That's the beauty of beastx, great performance out of the box, very little or no tunning at all and is good to go!

" Beauty and the Beast "

[rikef16]

Originally Posted by mic-21

" Beauty and the Beast "

LOL

[dinizhobby]

Second flight test of my Protos FBL(CGY-750)

Please comment about my vid

[ame]http://www.youtube.com/watch?v=daiD65Yasgo[/ame]

[Thalios]

Me flying this afternoon. I'm still a noob, but that was really fun. First real open space with FBL conversion and in 20mph winds.

Please pardon my daughter taking the video, she's only 9 hehe!

[dinizhobby]

Some flights of day
Sorry me for bad filming


[ame]http://www.youtube.com/watch?v=2rAifxlG1xs[/ame]

[ame]http://www.youtube.com/watch?v=lAhzilpJrXM[/ame]

[dinizhobby]

another flight

[ame]http://www.youtube.com/watch?v=54a2Zcp4sVI[/ame]

[nessie]

low rpm and smooth flying style.

[ame]http://vimeo.com/42300690[/ame]

[wbefield]

Originally Posted by nessie

low rpm and smooth flying style.

http://vimeo.com/42300690

That looked really fun. Nice flying!

[dinizhobby]

my last flight with mine Protos FBL
Please post comments!

[ame]http://www.youtube.com/watch?v=WjXRWzXJX80[/ame]

[Thalios]

Originally Posted by ligteltelecom

my last flight with mine Protos FBL
Please post comments!

Very nice flying!

I'm curious though. It seems to bog a lot under normal maneuvres. What headspeed, powertrain and batteries are you using?

[dinizhobby]

Originally Posted by Thalios

Very nice flying!

I'm curious though. It seems to bog a lot under normal maneuvres. What headspeed, powertrain and batteries are you using?

My batteries are very old, they are Volts 6S / 22.2v / 2600mah / 45C, are almost two years of use.
I didn't check RPM yet

But I think bog is bad pilot
I'm learning 3D

[Thalios]

Originally Posted by ligteltelecom

But I think bog is bad pilot
I'm learning 3D

No way! You're way better than I am and mine doesn't bog that much!

Might be the batteries.