Fuel line clamp

[Andy27012]

Have a align T. rex 600n. I am running the standard tank to a hayes 1 oz header. I am trying to figure a good way to cap or pinch the vent line coming from the header tank. I may be overthinking things but it seems like having a 1 inch long piece of tubing with a clip on the end would swing around and possibly damage things during flight. Any suggestions greatly appreciated .

[Rodney Kirstine]

I use fuel line plugs, like these:

http://www.experiencerc.com/store/pv...ug-p-1843.html

[Andy27012]

Thank you, that's what I was looking for but couldn't find.

[Rodney Kirstine]

You bet!

[Rob43]

Here's the ones I use at the end of the line. I really like these:


LINK

I found some on ebay. When I find out where that was, I will reply. The dots are nicer looking, but are apt to be dropped in the grass if you're anything like me...

[Commodore8888]

Regular old plugs is what I use. Eg, the metal hobbico ones for example.

For clamping fuel input/vent lines, some planker friends showed me these awesome clamps made by K&S (also listed as KSJ)

http://www.ronlund.com/rcheli-prod/BRAKS/KSJ975BK.html

[Rodney Kirstine]

I really like those tubing clamps, too. They work the best of the kinds I've tried.

[Rob43]

That's what I used right before the carb!