E4,E5 & E6 Family Photo's

[BeamHangar]

Hi all, Im inviting pics for this thread from those who have/had all (3)x Beams, ie; 450/500/600 and hopefully a few pics with all (3) models in the same picture.

Mine are all under construction still, and I will add my pics once I have them completed, but don't let that stop anyone else for sharing.

Thanks & Cheers
BeamHangar

[RasmusDK]

Beam 500 archon and beam 600 avantgarde

[trillian]

Cool! I have the E4 and E6 but have yet to get a photo with both of them together. I wish the Archon was being supported over here but no sign of it yet.

[RasmusDK]

Here are Beam 450SE, E5 Archon & 600 Avantgarde

[RasmusDK]

Beam 450SE



See much more here :

https://www.facebook.com/pages/Beamf..._type=bookmark

[BeamHangar]

Originally Posted by RasmusDK

Here are Beam 450SE, E5 Archon & 600 Avantgarde

THATS!!! what im talkin about. Job well done and they all look great. Thanks RasmusDK, i knew you would come through. Cheers

So what motor did you end up with? Some are saying they are Scorpion, but the one i looked at reminded me of Neu motors but had Beam on the can.

I think my undersized hangar will end up with something like 3x 450's, a 500 and a 600, PLUS either a 500 or 600 scale. So i should have 6 in total as RTF's.

Need to find a New/Used Archon in Aus though, and I havn't heard of anyone here with one yet.
(Local importer holding off for reports of the first production, got stung on the 600 1st release i guess) It may reach our shores eventually, but in the short term i think my best bet is to go direct from Asia and get one.

More pics, More pics!!!!!!!

[RasmusDK]

Hi.


As i wrote in the other thread, i'm sure it's a scorpion-ish motor design. I'm sure it's not a neu

I only know of one flying a Archon outside Korea
So it might be hard to buy a used one at this moment


Here are some more pics..

[jonnyflox]

hello beamers
some more pics of a avantgarde

[BeamHangar]

Originally Posted by RasmusDK

Hi.
As i wrote in the other thread, i'm sure it's a scorpion-ish motor design. I'm sure it's not a neu

Hmnnn, well maybe its me, but seeing as Scorpion are made in China, and the pics of the Archon motor say Korean Made, is it a matter of "buy scorpion winds and put our cans on them w/Korean Made (meaning the cover is Korean made)", or, perhaps a Korean copy of the whole Scorpion motor?

Whichever it is (even ones i didn't think to type in) I DO like the look of them, so will be interested to get feedback about them from users with some comparisons would be nice.
The only motors i have so far are Scorpion, Turnigy & Quantum (and they haven't all been used yet) so how about hearing some reports please?

Thanks & Cheers

[BeamHangar]

Originally Posted by jonnyflox

hello beamers
some more pics of a avantgarde

Hey jonny, nice pics there. Do you only own the AvantGarde? or do you own other Beam heli's too?

Thanks & Cheers

[BeamHangar]

Originally Posted by trillian

Cool! I have the E4 and E6 but have yet to get a photo with both of them together. I wish the Archon was being supported over here but no sign of it yet.

Now don't be coy Trillian, I have your sexy canopy on file but others don't so how about getting them on here now together, otherwise at least post your 600 in its glory.

Thanks & Cheers

[jonnyflox]

Originally Posted by BeamHangar

Hey jonny, nice pics there. Do you only own the AvantGarde? or do you own other Beam heli's too?

Thanks & Cheers

well, i have 2 avantgardes buy maby i docent count. i have only a gopro2
so i cant take familiy pics
i am counting money for the archon it will soon be here,

best regards

[BeamHangar]

Originally Posted by jonnyflox

well, i have 2 avantgardes buy maby i docent count. i have only a gopro2
so i cant take familiy pics
i am counting money for the archon it will soon be here,

best regards

2x 600's and a 500 = a Beam Hangar in my books.

I will shortly have my 4th 450 on the way, and then be saving for the Archon. I already have the 600 (mostly built).
Hopefully by then, there will be more outlets and/or some used bargains to get. I also need some more Rx's.

Then I will have to choose between the 500 and 600 to get my scale heli done (i will have a 450 scale done by then as well).

Pics please when you either do your build, or together with the 2x 600's would be good?


With Thanks

[RasmusDK]

let's see your beam's, beamhangar...

[BeamHangar]

Originally Posted by RasmusDK

let's see your beam's, beamhangar...

Yea, once their all complete, ATM, the closest to a flyer is my "basher" (on the bench awaiting parts) and I have a new Tx on the way which will be getting my attention for now, then to work out my PL8, so it will be a while but i will get them on here.

Cheers

~~EDIT~~ I forgot to mention, your pics and the others have the catalyst effect on me to get motivated.

[trillian]

OK, here's my family photo. Not the most inspiring backdrop but so it goes :-o

[Luigi_tuga]

The backdrop make quite a nice contrast, Trillian.
Nice Beam's, specially the Avangarde, very sleek

[BeamHangar]

[QUOTE=trillian;5925389]OK, here's my family photo. Not the most inspiring backdrop but so it goes :-o

Yea thats cool too. A nice bright canopy on the V1 E4 (suits the vibe i was after), im gonna have to get some sweet canopies for mine as i only have the stock ones. So many good ideas from looking at other set ups.

Closest to an original V1 i have is the frame sides and the flybar cage (part of a package deal, unused by me). Mine are V1 modded FBL, V2 Advantage FBL x2, and an SE on its way shortly. All for different set ups and uses.

Keep em coming folks, Im inspired to get a wiggle on.

Cheers

[jonnyflox]

hey beamers
yesterday i went to my local hobbyshop and 10 min later i went out with a nice looking box
with a beam 450se. here are some pics

[BeamHangar]

Holy crap, you are an eager beaver to get it home and have it built and into your Tx over night.....

Now thats dedication and exuberance all at once. Good job and nice looking bird, I had plans to have one here in two weeks but finances just got broadsided so it will be a bit longer yet.

So, how much did your kit cost you, and which kit did you get please?

Cheers

Originally Posted by jonnyflox

hey beamers
yesterday i went to my local hobbyshop and 10 min later i went out with a nice looking box
with a beam 450se. here are some pics