Can I bind my 8FG to the new Trex 150?

[RotorFloater]

I know the new trex 150 says it works w/ the s-fhss signal, but an 8FG uses the FAAST system which is not supported.
Isnt there something out there that can allow me to link my 8FG to the trex 150? Like to get a wintertime indoor Blade mcx2 for the living room and dont want more that 1 radio.

[pxpep]

No.

[McKrackin]

There are lots of options that you can use.

A Spektrum DSMX module(one of which I have for sale).
I have also seen a Futaba FHSS plug and play module that works with the 8FG.

I fly Futaba FASST,Spektrum DSM2/DSMX and Tactic...All with my 8FG.

Orange RX MOD (1 min 42 sec)

[sansone]

I believe FrSky makes a module for Futaba transmitters that binds with the blade stuff

edit: but I have swiss cheese for a brain

[RC Mike]

Originally Posted by RotorFloater

I know the new trex 150 says it works w/ the s-fhss signal, but an 8FG uses the FAAST system which is not supported.
Isnt there something out there that can allow me to link my 8FG to the trex 150? Like to get a wintertime indoor Blade mcx2 for the living room and dont want more that 1 radio.

You will have to install a FASST receiver in your helicopter. FrSky has some mice small FASST receivers that will work. http://www.alofthobbies.com/radio-ge...ompatible.html
　
You will have to check the Blade forum on how to wire it up.
　
　
.

[lavaandy]

The 14sg works in this mode and binds to the 150, could the 8fg be made to work with 150 with a software upgrade ?

[crf69]

i dont believe so.....8fg is fasst protocol only.

Sent from my Samsung S4 using Tapatalk 4 because Tapatalk2 just vanished........

[RC Mike]

Originally Posted by lavaandy

The 14sg works in this mode and binds to the 150, could the 8fg be made to work with 150 with a software upgrade ?

The 8FG does not have the hardware required to make S-FHSS.

.

[Varelco]

Originally Posted by McKrackin

I have also seen a Futaba FHSS plug and play module that works with the 8FG.

McKrackin have you got a link on where we can get hold of one of these modules? seems like there is hope for us 8FG users

[Varelco]

Think I might of found it;

http://www.robbe.de/general-link-mod...s-2-4-ghz.html