Register Now

Steve Evans · 08-26-2010, 04:11 PM

Glad my efforts have been of assistance. My charger is still working fine. I use it at 6.6A with my 6S batteries, and 3A with 3S. Balancing at 6S is painfully slow so I set the timer to 60 minutes as by then it's close even if the charge hasn't terminated.

Difficult to beat at the price, but I find it hard to recommend unless you're as resourceful as me!

Steve

Erario · 11-18-2010, 11:56 AM

Hi all!
My charger work fine, i've charged some lipo 6s 5000 mhA at 10A, with max internal temp. 45° Celsius.
But after to days the backlight going stranger (LOL), because now with 0% is too low, and at 100% is turned off... i don't understand, the backlight function now work "inverted", and with poor light.
There's way to "hard reset" the charger?

Erario · 11-18-2010, 12:17 PM

Another: press and hold "START" and "END" button and turn on the charger... what is this hidden menu? :-)

koolkiwikat · 10-23-2011, 07:24 PM

Does anyone know how to calibrate this charger? I have 2 units both showing different voltages vs my multimeter

Cheers!

Cyberfyn · 07-17-2012, 03:50 AM

I know this is an old thread, but I found it when looking for a high power charger. Anyway, I got the new V2 version of this charger and reading some of the issues, I had a look under the bonnet (hood for you Americans :-) ) It looks like all the issues have been addressed now. It has been running without any problems for several weeks, even when charging two 6S packs via a multi-balance board. Pic attached:

Ian F.

08-26-2010, 04:11 PM	#41 (permalink)
Steve Evans Registered Users Thread Starter Join Date: May 2007	Glad my efforts have been of assistance. My charger is still working fine. I use it at 6.6A with my 6S batteries, and 3A with 3S. Balancing at 6S is painfully slow so I set the timer to 60 minutes as by then it's close even if the charge hasn't terminated. Difficult to beat at the price, but I find it hard to recommend unless you're as resourceful as me! Steve __________________ Trex 450SEv2/HS65-MGs cyclic/Spartan Quark/DS520 tail Trex 450ProV2 DFC/CGY750 FBL/DS410s cyclic/DS520 tail Trex 500ESP DFC/CGY750 FBL/YGE-120LV ESC/DS510s cyclic/DS650 tail Blackout 330/OpenPilot Revo with FatShark 600mW VTX, Futaba 8FG 2.4GHz

11-18-2010, 11:56 AM	#42 (permalink)
Erario Registered Users Join Date: Jul 2006	Backlight??? Hi all! My charger work fine, i've charged some lipo 6s 5000 mhA at 10A, with max internal temp. 45° Celsius. But after to days the backlight going stranger (LOL), because now with 0% is too low, and at 100% is turned off... i don't understand, the backlight function now work "inverted", and with poor light. There's way to "hard reset" the charger?

07-17-2012, 03:50 AM	#45 (permalink)
Cyberfyn Registered Users Join Date: Jul 2012	I know this is an old thread, but I found it when looking for a high power charger. Anyway, I got the new V2 version of this charger and reading some of the issues, I had a look under the bonnet (hood for you Americans :-) ) It looks like all the issues have been addressed now. It has been running without any problems for several weeks, even when charging two 6S packs via a multi-balance board. Pic attached: Ian F. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-18-2010, 12:17 PM	#43 (permalink)
Erario Registered Users Join Date: Jul 2006	Another: press and hold "START" and "END" button and turn on the charger... what is this hidden menu? :-)

10-23-2011, 07:24 PM	#44 (permalink)
koolkiwikat Registered Users Join Date: Jul 2007	Does anyone know how to calibrate this charger? I have 2 units both showing different voltages vs my multimeter Cheers!

Register Now

Log-in