Register Now

hero-cheng · 05-07-2013, 02:48 PM

Thanks for your advices and clarification!
In spit of clarification , we still felt shame about we did not realize making wrong shafts until sold you the motor !
This lesson gave me a slap, let we woke up! We need keep wake up to do anything! Thanks!

IMHO, I also want to give an advice as follows:
I appreciated that you should return back the motor to my distributor as soon as you found its shaft is not fit for the heli and he should responsible for all costs in shipping!
Now you took so big effort to find and change an other company long shaft into the Xera motor , I worry about it would probably broke the motor original balance which made by precise special tools and machine in the company before ex-factory!
It means that there would be potential problem in the motor!
Have to say, I did not very appreciate your choice and action, forgive my direct!
Anyway, wish good luck to you!
Thanks for your attention to Xera motor!

pcskyhi · 05-08-2013, 01:06 PM

I appreciate your concern of the motor being out of balance but it has not been an issue for my other Xera motor (4030-470vk) that I had to put a longer Scorpion shaft into to utilize the shaft support in my MA Furion 6. My Furion 6 is the smoothest heli in my fleet and because of your motor it is a beast with power and gives me 7 minutes flying time on 12S.

When can we expect the proper shafts to be ready so guys don't run out and do what I did?

05-07-2013, 02:48 PM	#21 (permalink)
hero-cheng Registered Users Join Date: Dec 2007	Thanks for your advices and clarification! In spit of clarification , we still felt shame about we did not realize making wrong shafts until sold you the motor ! This lesson gave me a slap, let we woke up! We need keep wake up to do anything! Thanks! IMHO, I also want to give an advice as follows: I appreciated that you should return back the motor to my distributor as soon as you found its shaft is not fit for the heli and he should responsible for all costs in shipping! Now you took so big effort to find and change an other company long shaft into the Xera motor , I worry about it would probably broke the motor original balance which made by precise special tools and machine in the company before ex-factory! It means that there would be potential problem in the motor! Have to say, I did not very appreciate your choice and action, forgive my direct! Anyway, wish good luck to you! Thanks for your attention to Xera motor! __________________ Meanness is the pass to who is mean,nobility is the epitaph to who is noble!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-08-2013, 01:06 PM	#22 (permalink)
pcskyhi Registered Users Join Date: Jul 2006	I appreciate your concern of the motor being out of balance but it has not been an issue for my other Xera motor (4030-470vk) that I had to put a longer Scorpion shaft into to utilize the shaft support in my MA Furion 6. My Furion 6 is the smoothest heli in my fleet and because of your motor it is a beast with power and gives me 7 minutes flying time on 12S. When can we expect the proper shafts to be ready so guys don't run out and do what I did?

Register Now

Log-in