Register Now

Alfred · 04-09-2004, 09:41 AM

I have bought a hardly flown Fury Expert 60 which came with JR Servo supports.
Although I am a JR User, I have chosen the S9252's and a S9253 for servos.

What do I need to change to convert them to Futaba Supports?

DavidH · 04-09-2004, 09:52 AM

Alfred,
The only difference in the two versions of the kits JR and Futaba is the posts that go in the servos.
Futaba is 2.5 mm threads
JR is 3mm threads.

You can use the 3mm threads in the Futaba servos. You will just need to take a 3mm tap and thread the plastic output gear of the Futaba servos.
I have seen several pilots do this with no problems.

If you want to use the Futaba posts. You will need to order
115-73 M2.5 Threaded Servo Bearing Stud ( Futaba)
4 of them come in a package.

David

Alfred · 04-09-2004, 10:25 AM

Thanks David...

That was a quick reply..

I am starting to itch to get it ready.
The servos will be here next week and I can't wait to get her up in the air.
I can modify the servos if I have to as they will be designated to the Fury only.

This one has a 70 OS MAX SZ with an MP2 Muffler mounted.
It also came with a GY401

IT's going to be a whole new experience as my other X-Cell uses a YS61ST2 with a Hatory Muffler and JR DS8231's plus a 8700G with a CSM 540.

So this heli is going to be a whole new ballgame as I have also never used ECCPM either
:?

04-09-2004, 09:41 AM	#1 (permalink)
Alfred Registered Users Join Date: Apr 2004	Fury Expert,Servo Supports JR to Futaba..what needs changing I have bought a hardly flown Fury Expert 60 which came with JR Servo supports. Although I am a JR User, I have chosen the S9252's and a S9253 for servos. What do I need to change to convert them to Futaba Supports?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-09-2004, 09:52 AM	#2 (permalink)
DavidH My HF Map location Join Date: Mar 2004	Alfred, The only difference in the two versions of the kits JR and Futaba is the posts that go in the servos. Futaba is 2.5 mm threads JR is 3mm threads. You can use the 3mm threads in the Futaba servos. You will just need to take a 3mm tap and thread the plastic output gear of the Futaba servos. I have seen several pilots do this with no problems. If you want to use the Futaba posts. You will need to order 115-73 M2.5 Threaded Servo Bearing Stud ( Futaba) 4 of them come in a package. David

04-09-2004, 10:25 AM	#3 (permalink)
Alfred Registered Users Thread Starter Join Date: Apr 2004	Thanks David... That was a quick reply.. I am starting to itch to get it ready. The servos will be here next week and I can't wait to get her up in the air. I can modify the servos if I have to as they will be designated to the Fury only. This one has a 70 OS MAX SZ with an MP2 Muffler mounted. It also came with a GY401 IT's going to be a whole new experience as my other X-Cell uses a YS61ST2 with a Hatory Muffler and JR DS8231's plus a 8700G with a CSM 540. So this heli is going to be a whole new ballgame as I have also never used ECCPM either :?

Register Now

Log-in