60a V4

[Chris Nifty]

Hey freaks, was just looking at the specs on the Platinum 60 V4 and noticed that it has either soft cut or hard cut I presume for low voltage cut out. That seems different to the YGE which has cut off or slow down, the latter still allowing enough power to come in and land. So, is that not the case with the Hobbywing? Soft cut sounds more like a cut than a slow down.

[DarkSyd3D]

Originally Posted by Chris Nifty

Hey freaks, was just looking at the specs on the Platinum 60 V4 and noticed that it has either soft cut or hard cut I presume for low voltage cut out. That seems different to the YGE which has cut off or slow down, the latter still allowing enough power to come in and land. So, is that not the case with the Hobbywing? Soft cut sounds more like a cut than a slow down.

Soft cutoff will reduce the rpm by 50% in the HW. Hard cutoff will kill the rpm all together. It's best to set the voltage protection to its default at 3.0v. If you have worn out packs you'll hit that cutoff pretty quick

[Chris Nifty]

Great, thank you!