Vbar and a9

[Bubba Gump]

So been fly vbar awhile and vbar gov. But if you run vbar gov with a full size rx you can't run bank switching or tail gains through the radio. Well I think I have a solution for now. A single line converter, ikarus makes one for wireless simming. I have it all up and working on the ground so far. I will post a picture and my thoughts after I finish the setup and fly with it.

Forrest
Team Hitec

Sent from my SPH-D700 using Tapatalk 2

[Bubba Gump]

The single line converter works like a champ I will post some pics and a how too and vbar file.

Sent from my CM9 ICS Epic 4g

[Sulzer]

Originally Posted by Bubba Gump

The single line converter works like a champ I will post some pics and a how too and vbar file.

I bought Futaba 8FG bacause of this problem with v-bar. Thank you Hitec! You forced me to excellent brand radio with s-bus technology! And I'm really happy about the case! I've fully moved my heli fleet to Futaba and still have Hitec radio for sim and for planes may be. I don't understand. Hitec lose his market and customers. What's a problem to produce single line rx?! Why do I have to buy additional stuff for extra money? Is it difficult or impossible to create new firmware to existing rx's?

[Bubba Gump]

Right now the single line rxs are being worked on with the faster frame rate rxs. The biggest problem with the 8fg is feels too plastic. No rubber and the ergonimics suck to me.

Sent from my SPH-D700 using Tapatalk 2

[Sulzer]

Originally Posted by Bubba Gump

The biggest problem with the 8fg is feels too plastic. No rubber and the ergonimics suck to me.

"The biggest " - agree! Because there are no any other problems with this excellent radio.
It's not a problem at all. It's a case of personal feeling.

[Bluemoose]

I know this is an old thread but i'm trying to setup this right now and am looking for help with where the esc plugs in the rx or the vbar or somewhere else?

[Bluemoose]

OK Same thing no throttle?

Here's what I have.
A= j3
E=j2
T=j3
R=j3
G=j3
P=j3
TH=SW A

Vbar setup

Ch 1,2,4 RX A
CH 3 ESC
CH 4 RX B
Bat/CH 6 Y to RX C

No Trottle? What am I missing?

[Bubba Gump]

plug your esc/throttle into ch 3 on the rx. Assuming that channel 3 is what you have assigned in the radio for throttle. This is what hitec is defaulted too. You will also need to setup throttle curves