Register Now

MyRCode · 11-09-2015, 10:29 AM

Anybody know where to get some 550 size night blades? Everywhere I look is out of stock.

DUCDOC · 11-09-2015, 08:53 PM

Espritmodel.com has them.

Corvette & Copter Guy · 06-20-2016, 11:16 AM

So it looks like the MS blades are no longer made and the company went under

Are the night magic blades the ONLY option???
This will be my first night heli (I did turn my 230s into one but didn't have blades). I did put a Neo w/rescue on my 550 so at least I have a back-up should I get into trouble. Still a lot of money though. Although I have great soldering skills, not sure I want to do a DIY set. The Perfect Regulator kit is an option but out of stock or I have read a few bad comments about them as of late. Looking for options.

thanasi · 06-26-2016, 09:08 PM

I think building your own set is the best option, about the ms comp i ran then in my gobby 500 stretch and they felt like crap, no response very mushy feel to them. I know night flying isnt about smack but heck why not !

Corvette & Copter Guy · 06-30-2016, 03:14 PM

I did get a set of them at Hobby king. Now the wait as they only have them in the international warehouse.

Epoweredrc · 09-01-2016, 12:42 PM

Night blades are not popular anymore, not sure if ever was and I really don't understand why that is.

Sent from my SM-S920L using Tapatalk

11-09-2015, 10:29 AM	#1 (permalink)
MyRCode Registered Users Join Date: Aug 2012	550 mm Blades Anybody know where to get some 550 size night blades? Everywhere I look is out of stock. __________________ Protos Max 800 \| Goblin 500 \| Gaui X3 \| Goblin 280 \| Oxy 2 MXP 150 \| CM Stigg FrSky Horus \| Spirit FBL \| CC and HW ESCs

11-09-2015, 08:53 PM	#2 (permalink)
DUCDOC Registered Users Join Date: Dec 2014 Location: Avoca, Iowa	Espritmodel.com has them. __________________ Gabriel Sandoval "NitroGabe" soXos USA Flight Team, Team JR PROPO Team Scorpion, Team YS engines USA Bavarian Demon Flight Team #HIGHONHELIS

06-20-2016, 11:16 AM	#3 (permalink)
Corvette & Copter Guy Registered Users My HF Map location Join Date: Dec 2010 Location: Goodview,MN.	So it looks like the MS blades are no longer made and the company went under Are the night magic blades the ONLY option??? This will be my first night heli (I did turn my 230s into one but didn't have blades). I did put a Neo w/rescue on my 550 so at least I have a back-up should I get into trouble. Still a lot of money though. Although I have great soldering skills, not sure I want to do a DIY set. The Perfect Regulator kit is an option but out of stock or I have read a few bad comments about them as of late. Looking for options. __________________ LOGO 200, DIABOLO 550, DIABOLO 800, SOXOS 7.1 VCONTROLNEOTRIBUNUSMKSVTXDPL8 W/BUMP CONTROLMEANWELL

06-26-2016, 09:08 PM	#4 (permalink)
thanasi Registered Users Join Date: Feb 2011	I think building your own set is the best option, about the ms comp i ran then in my gobby 500 stretch and they felt like crap, no response very mushy feel to them. I know night flying isnt about smack but heck why not ! __________________ Vbar Cont/Dx9 Align 600XN my first Nitro ! Original Goblin 500 stretched/Lynxed out Oxy2 now stretched and a few micros Lynx Heli/Team pilot

06-30-2016, 03:14 PM	#5 (permalink)
Corvette & Copter Guy Registered Users My HF Map location Join Date: Dec 2010 Location: Goodview,MN.	I did get a set of them at Hobby king. Now the wait as they only have them in the international warehouse. __________________ LOGO 200, DIABOLO 550, DIABOLO 800, SOXOS 7.1 VCONTROLNEOTRIBUNUSMKSVTXDPL8 W/BUMP CONTROLMEANWELL

09-01-2016, 12:42 PM	#6 (permalink)
Epoweredrc Registered Users Join Date: Aug 2007 Location: Georgia	Night blades are not popular anymore, not sure if ever was and I really don't understand why that is. Sent from my SM-S920L using Tapatalk __________________ RAW 580 ,lots of Planes Powered by IX14 AMA 36 yrs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in