START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
500 Class Electric Helicopters 500 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
11-06-2007, 08:23 PM | #21 (permalink) |
Registered Users
|
http://www.youtube.com/watch?v=hyhqaFzRT2E
A heli with clockwise retaliation rotor would make the tail kick right when full pitch is applied. No sign of right kick here. The tail stays solid at the lowest point, then goes over as it slowly turns towards the view direction of travel. -Angelos |
Sponsored Links | |||
Advertisement |
|
11-06-2007, 08:26 PM | #22 (permalink) |
Registered Users
Join Date: Jun 2006
|
let it go guy's, it's not a big deal...
|
11-06-2007, 11:28 PM | #24 (permalink) |
Team Taco VP
Thread Starter
|
Well bottom line I am using this gyro on my Trex600 Nitro and there is no weird wag problem or anything like that but you do have to get your gain set right. This gyro doesn't wag in hover like others if gain is too high but does a short wag/kick in FF with hard turns if the gain is too high. Maybe in that test flight they just had not got the gain set yet.
In the end this is a rockin gyro for me. I will probably put one on my 500 when I get it Bob
__________________
"Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco! |
11-07-2007, 03:09 AM | #25 (permalink) |
Registered Users
|
The slow motion video was at the 26-28sec section. Is it not the one you meant?
-Angelos |
11-08-2007, 09:10 PM | #26 (permalink) |
Registered Users
Join Date: Dec 2006
|
I've seen most of the T500 vids using 6s packs, just wanna know if 4s, say 3300-3700mah packs or 2 x 2100mah in series will really be enough for mild 3D. Or maybe i ask this question too early? Hope some experts here can give some early advice, cus i really want one.
|
11-13-2007, 10:01 PM | #27 (permalink) |
Registered Users
Join Date: Jun 2006
|
exactly the same except just less input....
|
11-15-2007, 09:58 AM | #28 (permalink) |
Registered Users
Join Date: Oct 2006
|
Great Heli
What a great Heli, seems like the perfect buy if you already own a Trex 450 & a Trex 600.
Being able to use your 3S packs in series is another bonus. I will definately be buying one of these babies.
__________________
ADK TREX 450 SE, HS65MG, 9650, GY401, Align 3K CF main Blade. DRAGONUS II PRO, FUT S3153 DIGITAL SERVOS, GY401, Align 450XL . TREX 600CF, 9255'S, GY401 9254, Fut 138 DP RX. TREX 500CF, 4x9257 on 6 volt, GY401, 6S 2500's EVOLITE'S, 13T, 2700HS. |
11-15-2007, 02:32 PM | #29 (permalink) |
Registered Users
|
Frickin' fantastic flying. I nearly get wood when I see a heli moving like that. THAT is the reason I HAD to get into flying helis.
Two questions come to mind: 1) how long have most of the guys who fly similar to that been flying? I realize it's the amount you put in daily, but on average - what kind of years do these guys have under their belt? 2) what is the point of the crack moves - I honestly can't see what it's doing on the heli. Plus I think it's very mis-labeled, because the real crack move would be when you steal and pawn that heli and controller for $120 |
Thread Tools | |
Display Modes | |
|
|