START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
nano CP X Brushless Mods Blade nano CP X Brushless Mods Information and Help |
|
LinkBack | Thread Tools | Display Modes |
12-22-2012, 09:38 AM | #1 (permalink) |
Registered Users
Join Date: Nov 2012
|
Nano cutting out in spool up
My nano won't even take of little and motor cut in and out. It will almost take off but then will just shut off. Tried new batteries, plug connection, changed motor to brushless, still is doing same thing. Anything I'm missing
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
Sponsored Links | |||
Advertisement |
|
12-22-2012, 09:54 AM | #2 (permalink) |
Registered Users
|
Make sure the gear isn't making the shaft too tight. Meaning that the bearings aren't squeezed between the gear and mainshaft collar.
__________________
Lynx 130X, Lynx 180x, Oxy 2, Oxy 5 HF, Goblin 380, Helimax MX450 FBL, Pantera 50 Nitro, Pantera 50 electric conversion w/ quattro head, and CYE Stingray 500. |
12-22-2012, 10:09 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
Did that
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-22-2012, 10:28 AM | #4 (permalink) |
Registered Users
Join Date: Apr 2011
|
Try a new tail motor. Could be going bad drawing to much current which shuts down the board.
__________________
- 130X & 130S - Oxy 2 uBrain2, 180 CFX / uBrain - Blade 350QX3, Nano CPS, Nano Quad, & Inductrix - DX8G2 and DX7S |
12-22-2012, 12:04 PM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
Ok I will try that. didn't think of that
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 12:34 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
Ok so still have the same problem cutting out I have already replace the tail motor, 3 in 1, went mild brushless kit, it's still doing it I don't understand. also pre warmed my batteries which are brand new and still is doing it any suggestions. I need help
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 01:40 PM | #7 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 02:26 PM | #8 (permalink) |
Registered Users
Join Date: Mar 2011
|
You may have a main motor FET going bad.
__________________
Team Newb pilot All my helis and quads were lost in a tragic boating accident. |
12-29-2012, 02:26 PM | #9 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
Brand new 3 in 1
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 02:28 PM | #10 (permalink) |
Registered Users
Join Date: Feb 2012
|
sometimes my elevator servo gets stuck causing this same issue. i just give the little servo gear a nudge and it re-centers itself...she flies fine after that.
good luck |
12-29-2012, 02:48 PM | #11 (permalink) |
Registered Users
Join Date: Mar 2011
|
Sounds like you have replaced everything except the servos and your TX. Process of elimination I would supose.
__________________
Team Newb pilot All my helis and quads were lost in a tragic boating accident. |
12-29-2012, 03:00 PM | #12 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
Must be servos cause I even replace the tx
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 03:06 PM | #13 (permalink) |
Registered Users
Join Date: Feb 2012
|
Craig, while your here, might as well ask a related?
The mild bl nano I got (bought used from a guy who you built for a few weeks ago) is getting about 3 mins of medium use (a few flips, etc) before having to land (coming down with about 3.65-3.7v on newish stock batts). Is this about right? |
12-29-2012, 03:10 PM | #14 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
What size batteries
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 03:11 PM | #15 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2012
|
I stock sorry missed that. That seems good for stock batteries
__________________
Travis(twill) Aircapitalheli.com Xnova motors and kbdd blades |
12-29-2012, 03:29 PM | #16 (permalink) | |
Registered Users
Join Date: Mar 2011
|
Quote:
__________________
Team Newb pilot All my helis and quads were lost in a tragic boating accident. |
|
12-29-2012, 04:57 PM | #17 (permalink) |
Registered Users
Join Date: Feb 2012
|
OK, thanks.
So would you recommend the Hyp 160's over stock? |
Thread Tools | |
Display Modes | |
|
|